Engineering Expert Witnesses in Oregon

This well credentialed expert earned his B.S. and M.S. in Mechanical Engineering from Cal State Fullerton and his Ph.D. in Civil Engineering/Structural Mechanics from UC-Irvine. He is a Professional Engineer in the state of California and has 46 U.S. patents issued in his name. Prior to starting his own engineering consulting firm, he was the Vice President of Engineering at Hartwell Corporation and the Vice President of Research and Development at Textron Aerospace Fasteners. He is a member of several industry organizations, including the National Society of Professional Engineers and the American Society of Mechanical Engineers.

This expert has over 27 years of professional engineering experience encompassing public agencies (Federal Highway Administration (FHWA), the California Department of Transportation (Caltrans), academia (California State University, National University) and industry with over 200 technical publications. He taught at California State University and at National University various in topics such as transportation and highway engineering, including geometric design standards, traffic engineering and safety hazards as well as statistics. He started his work at Caltrans in 1991 as a transportation engineer before transitioning to a senior transportation engineer (Branch Chief), then being promoted to a supervising transportation engineer (Office Chief), then to a Division Chief. He received his Ph.D. in civil engineering (Transportation/Pavement Engineering) from the University of Arkansas, and received his M.S. in civil engineering (Construction Engineering and Management) from San Jose State University, and B.S. degree in Civil Engineering from California State University, Sacramento.

This highly qualified Chemical Engineer obtained his PhD in Chemical Engineering from the University of Cambridge. He has 30+ Publications on the topic of Chemical Engineering and is currently the Owner of a Private Engineering Consulting Firm. He is experienced in industrial experimentally-based R&D, including bulk solids mechanics, polymers, selective propylene oxidation, heterogeneous and homogeneous catalysis, catalyst development and manufacturing and biotechnology.

This seasoned expert has been involved in the diving industry since the 1970s. He earned his B.S. in Mechanical Engineering from the University of California, Santa Barbara and also completed additional graduate work in Human Physiology and Exercise Physiology at both California State University, Long Beach and California State University, San Diego. The expert is certified as a Scuba Instructor by the National Association of Underwater Instructors, the Los Angeles County Underwater Unit, and the Professional Association of Diving Instructors. He previously worked as the Chief Engineer of Water Sports at AMF Voit, the Technical Director at Sea Quest, the Director of Engineering at U.S. Divers Co., and the Director of Product Development at Sherwood Scuba.

This highly qualified engineering expert specializes in water treatment engineering, design, and operations. He is a certified water treatment and distribution operator. He belongs to a number of prestigious societies in the water treatment field and has authored more than 5 publications on the topic. This expert is currently a private water treatment industry consultant.

This registered Professional Electrical Engineer and Professional Control Systems Engineer earned his BS in Mechanical Engineering from the Massachusetts Institute of Technology and his MS in Electrical Engineering from Stanford University. He holds more than 25 US patents and is an active member of the Institute of Electrical and Electronics Engineers as well as the National Fire Protection Association. For a number of years he served as the Chief Engineer at the Tyco Corporation, developing heat tracing technologies. Since 2008, he has operated an independent San Francisco Bay Area consultancy specializing in electrical and mechanical engineering.

This expert is very well qualified the field of electrical engineering and power source design and qualification. He received his BS and ME in Biomedical Engineering from Worcester Polytechnic Institute. He is a member of the Board of Directors of the Power Sources Manufacturing Association and several branches of the Institute of Electrical and Electronic Engineers including IEEE Consultants Network and Chairs the San Francisco Bay Area IEEE Power Electronics Society. This expert specializes in analog/digital power and design as well as hardware failure analysis, manufacturing, and market analysis. He is currently a Principal at a power design consultancy that specializes in enterprise-level and consumer applications.

This expert has over 35 years of experience in the field of bridge design and construction. He earned his BS at the Portuguese Military Academy, and a Graduate Engineering Diploma and MS in Structural Engineering at the University of Witwatersrand (Johannesburg, South Africa). He is certified as a Professional Civil Engineer, as an Expert Analyst in Finite Elements Methods, and as an Advanced Concrete Technologist. He has previously served as a Senior Regional Bridge Engineer for the SE of the US and South America while working for AECOM, Head of Structural Design for Consulgal, and has worked on a number of projects as a freelance Expert Consultant in Structural and Bridge design and construction. He currently serves as a Senior Supervising Engineer for an Engineering company ranked at the top 20 in the US, in their Irvine office in California.

This expert has spent 35+ years in the mining industry, during which reclamation planning/execution has been a focal point. His experience includes mine and reclamation planning, mine and reclamation plan permitting by way of Environmental Impact Statements (EIS) under the Mineral Leasing Act (MLA) and National Environmental Policy Act (NEPA), implementation of best mining and reclamation practices, mine closure, and historic/legacy mine remediation. He began his own consulting business in 2016 and previously served as the Manager of Mining Projects and Remediation for Agrium USA. The expert is a registered Professional Engineer in Idaho and a member of the Society of Mining Engineers. He earned his B.S. in Mining Engineering from University of Utah and his MSHA trained.

This expert in biomechanical engineering has studied typical and perturbed patterns of postural and gait initiation and computational biomechanics of the human finger. She has used her biomechanics acumen to assist in the development of: a shock-resistant mission module support system and energy absorbing and crashworthy seats for helicopters. Her efforts assisted in redefining the recommended lumbar load tolerances for improving the crashworthiness of seating in naval helicopters. She holds a MSc degree in Bioengineering from the University of Illinois at Chicago and a BS in Mechanical Engineering from Northern Arizona University. She is a member of the International Society of Biomechanics, the Association for the Advancement of Automotive Medicine and the Society of Automotive Engineers.

This expert has over 32 years as an Accident Reconstructionist and Forensic Engineer, and is ACTAR Accredited. He is a certified Crash Data Retrieval (CDR) technician, operator and data analyst. He is a former Chair of the Engineering Sciences section and Fellow of the American Academy of Forensic Sciences, and a member of 5 additional forensic groups including CAARS, NAPARS, SAE, SATAI and SOAR. He has 100 publications and presentations in the field of forensic automotive engineering and is currently the owner of an Accident Reconstruction firm.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This expert works as the vice president of engineering for a large fitness corporation. He has worked in the industry for over over thirty years, is familiar with industry trends, and is familiar with the history of numerous fitness products. He holds multiple patents for highly used fitness equipment and has published multiple articles on product safety/warning labels. He is chairman of the committee responsible for fitness industry standards and has authored or contributed to all standards published to date. He has worked on product liability cases for 34 years assisting both defense and plaintiffs attorneys.

This expert specializes in all aspects of the roofing industry -- he is a registered professional engineer (CA, NV, MN), a registered roof consultant, a well-published author on a variety of roofing issues, and a distinguished fellow of the Roof Consultants Institute. This expert holds a Masters Degree in Civil Engineering and has spent more than 30 years investigating, designing, and providing consulting services regarding roof and waterproofing systems. He is a member of the Board of Directors for both the Cool Roof Rating Council and the Special Interest Group for Dynamic Evaluation of Roofing Systems. This expert is the President of Technical Roof Services where he provides a full range of roof, waterproofing, building envelope, and solar PV consulting services including condition evaluations, failure investigations, defect investigations, construction documentation, condensation analysis (hygrothermal modeling), surveys for wet insulation, and construction observations. This expert is a well known speaker on roof technology.

This expert is a routing/switch professional and is CTO of a worldwide Cloud Computing company competing with Amazon, Rackspace & others. He is a co-founder, Executive Vice President, and Chief Technology Officer of an award winning Cloud Provider known for excellence in hosting servers, storage and virtual desktops which won Network World Magazine's desktop-as-a-service shootout, the UP Cloud Computing Conference for Best VDI Solution, and Microsoft SMB Cloud Partner of the Year.

This expert's skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. He is a fellow of the National Society of Professional Engineers and currently consults on a number of mechanical engineering projects.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This expert is globally known for his expertise in telecommunications and wireless networks, a field he has worked in for the past 40 years. He has worked for military contractors, universities, Fortune 500 companies, and start-ups. Having earned his PhD in Electrical Engineering and Communications from Purdue University, his counsel is frequently sought by business ventures in the wireless electronics field.

This highly qualified software professional is an expert in software and computing technology with 20+ years of experience as an inventor, engineer, and programmer. He designed and built the web's first online bookmark site, and belongs to the IEEE Computer Society and the Application Developers Alliance. This expert has worked as a programmer, software development manager, technical analyst, CTO, software engineer, and mentor in a wide variety of industries including enterprise software, digital entertainment, and web-enabled government. He also launched a number of Internet startups using cutting-edge technologies like cloud-based server scaling, machine learning (AI), and personalized social ad targeting. His first startup, created significant prior art used in multiple patent cases. He currently serves as a consulting and testifying expert where he provides software analysis and computer forensics.

This expert in the biomechanics of the human spine earned his undergraduate degree from the University of Pennsylvania and his doctorate in biomedical engineering from Duke University, where he researched spinal trauma. In recognition of his scholarly contributions, the Orthopedic Trauma Association granted him the 'Best Paper' award for his work on spine trauma and the spine's response to loads. He has served as a reviewer for the both the 'Journal of Biomechanics' and 'Spine'. He has significant exposure to the clinical arena, having taught residents and fellows in orthopedic surgery at the Baylor College of Medicine and the Methodist Hospital in Houston, Texas. He currently applies his knowledge as a consultant.