Engineering Expert Witnesses in Missouri

This highly-qualified expert has nearly 50 years of experience as a chemist. He received his BS in chemistry from the University of Illinois before earning his MS in organic chemistry from the University of Minnesota and his PhD in organic chemistry from Loyola University. Throughout his extensive career, he has gained experience in several facets of chemistry, including industrial chemicals, household chemicals, chemical exposure and accidents, product liability, premises liability, paint and coatings, labels and warning, aerosols and spray products, and patent infringement. He is active in his field as a member of several associations, including the National Paint and Coatings Association, the Federation of Societies of Coatings Technology, the American Society of Testing Materials, and the National Association of Corrosion Engineers. This expert began his career as a senior research scientist for the Continental Can Company before becoming the group leader for resin development at Rust-Oleum. While at Rust-Oleum, he also served as the manager for both coatings research and development and manufacturing technical support before holding the title of technical director. he has also served as an assistant professor of chemistry at Roosevelt University, an industrial research consultant for Northwestern University, the executive director of PRA Laboratories at Eastern Michigan University, and the vice president of R&D for Roman Adhesives. For over 20 years, this expert has served as a consultant for a private firm.

This highly qualified engineer has over 15 years of consumer products engineering experience. He has held many prestigious positions at such companies as Electrolux and General Electric and currently owns and is a lead engineer of a highly successful electronics design firm.

This expert is highly qualified in the field of physical education, physical training, and exercise. With over 40 years of experience in the field, this expert has served as a university department chair, led K-12 health and physical education for the State of Iowa, and inspired an Army physical readiness training paradigm shift that remains unchallenged today.

This expert has been a practicing engineer for nearly 25 years. A registered Professional Engineer in good standing in 45 states (including Florida), he is a member of several professional engineering societies, as well as the International Sign Association and the Mid-South Sign Association. He has worked for a number of large engineering firms and industrial manufactures, and he currently serves as an Engineering Manager at an engineering firm that is a leader in the sign industry.

This highly qualified aeronautics expert earned his masters and PhD in Aeronautics and Astronautics from MIT. He is a fellow in the American Society of Mechanical Engineers, and an associate fellow in the American Institute of Aeronautics and Astronautics. He has authored more than 100 publications in the aeronautics space and is currently a Professor of Aerospace Engineering at a top midwest university.

This expert consults on all aspects of human factors, applied human performance, ergonomics, and safety. Areas of particular expertise include: human-machine interface design and evaluation, human capabilities and limitations in applied environments, instructions and warning, perception/vision/visibility, the evaluation of equipment and structures from a human use standpoint, and safety-related issues in general. He is recognized as an expert in operator-vehicle interaction, and is a Certified Human Factors Professional. He has published more than 50 technical papers dealing with various issues relating to applied human performance and accident investigation.

Expert in rapid transit accident investigation, particularly rolling equipment and motive power, event recordings, track, operations, train handling, and human performance. He retired from the National Transportation Safety Board after 22 years as an investigator-in-charge in which time he participated in 57 major accident investigations, 32 field accident investigations, 10 public hearings, 16 depositions, and 6 special studies.  He wrote 11 major accident reports, 8 field accident reports, and personally conducted 10 sworn depositions. He was responsible for over 157 adopted NTSB safety recommendations in all facets of rail transportation. He previously worked for the Burlington Northern Railroad as a mechanical department manager. After his NTSB retirement, he became Assistant Vice President of Operations, Planning and Analysis for Rail Sciences Inc. As the son of a now 96-year old retired locomotive engineer who had 42 years of service, he grew up in a railroad family and became fascinated with trains and the rail industry, particularly safety.

This highly qualified hazardous materials transportation expert earned his BS in Industrial Engineering, his MS in Engineering Management, and his PhD from Kennedy Western University. This expert has been involved in the development and implementation of hazardous materials safety regulations for more than 30 years and has been responsible for a broad range of domestic and international hazardous materials safety efforts. He has served as the chairman of the UN Sub-Committee of Experts on the Transport of Dangerous Goods, and as the chairman and vice chairman of the ICAO Dangerous Goods Panel. This expert spent 18 years in the Department of Transportation/Pipeline and Hazardous Materials Safety Administration's Office of Hazardous Materials Safety, and currently serves as the VP of Government Affairs/Consultant for a private hazardous materials shipping solutions firm.

This expert has published extensively in magazines, in-house journals, and textbooks. He is a participating member of numerous societies. He has over 40 years personal experience in management, consulting and expert services in the fields of design, manufacturing, testing of hydraulic, pneumatic and electro-mechanical lifting and load bearing machines, equipment and devices: industry experience including automotive, construction, industrial, material handling, warehousing and transportation: forensic engineering including product liability, accident investigation, reconstruction and expert testimony: incidents involving industrial trucks, aerial work platforms, forklifts, telehandlers, tuggers, pallet jacks, automatic storage and retrieval systems, dock boards, dock levelers, trailer restraints, trailer jacks, racks, conveyors, overhead bridge cranes, trucks, shop cranes, scissors lifts, shop cranes, automatic doors and lift gates: heavy equipment involving telehandlers, powered industrial trucks, automatic storage and retrieval systems, gantry cranes, truck cranes, tower cranes, cranes with hydraulic booms, cranes with lattice booms, grapple and magnet equipped excavators, and side boom cranes: conformity issues involving environmental, health and safety, warnings, instructions, training conformity with recognized standards, codes, industry custom and practice and government regulations.

This expert brings 40+ years of electrical engineering experience to a continuing career in failure analysis and electrical fire investigations. In addition to his professional work for several industrial firms, he has taught these subjects at the Illinois Fire Academy., Wisconsin IAAI.

This highly qualified expert earned his B.S. and M.S. in Mechanical Engineering and a Ph.D. in Biomedical Engineering from Marquette University. From 1977 until 2010, he held increasingly senior roles within Baxter Healthcare Corporation, most recently serving as the Technical Director of Applied Science & Technology. He was an Adjunct Professor at Northwestern University and spent four years at Exponent before becoming an independent consultant. The expert is a registered Professional Engineer in Illinois and has received 17 U.S. patents.

This highly credentialed biomedical engineer has significant experience in the design and development of cardiothoracic medical devices. He earned his Master's degree from Georgia Tech and the Emory University School of Medicine; After six years of industry experience he returned to academia and obtained the PhD from the University of Aarhus in Denmark. Then at the Aarhus University Hospital he achieved the Doctor Medicinae (DrMed) degree, which denotes medical research expertise above and beyond a PhD. He is an active member of several scholarly societies in the biomedical field and is a regular reviewer of the Annals of Biomedical Engineering, the Journal of Surgical Research, and Cardiovascular Engineering and Technology. He currently serves on the biomedical engineering faculty of a major Southern university.

This licensed professional structural engineer is one of the most well regarded practitioners and academics in IL. He earned his Masters of Structural Engineering at Bradley University and his PhD in Structural Engineering at the University of Wisconsin. Before entering academia, this expert has substantial hands-on structural engineering experience at firms such as Skidmore Owens & Merrill and GRAEF-USA. He has held professorship positions at the University of Illinois at Chicago and Illinois Institute of Technology. This expert is currently a structural engineering consultant for several structural engineering firms nationally and internationally and a clinical associate professor of engineering in Chicago.

This expert runs a full-service, comprehensive safety and engineering facility. As a leader in the field of mechanical engineering and safety, his goal is to increase awareness of personal safety issues, while maintaining exacting standards and best practices of the science of personal safety and industrial safety. He is a member of numerous prestigious societies in the field, including the Society for the Advancement of Material and Process Engineering and the Society of Automotive Engineers. Currently, this expert is the principal of a design engineering and safety analysis firm.

This highly qualified expert earned his BS and PhD in metallurgical engineering from the Illinois Institute of Technology. He is a licensed engineer in five states and has over 34 years of engineering experience. He is a member of the National Society of Professional Engineers, the American Society for Testing and Materials (ASTM), and a founding member of the Failure Analysis Society. He has published 18 articles on various topics in engineering and currently serves as a principal engineer at an engineering consulting firm in Illinois.

This expert has over 20 years of experience in products engineering. He gained his MBA from Roosevelt University and has 26 patents in his name. He has designed in-ear microphones, consumer earphones, and various acoustic instruments. Currently he serves as the vice president of engineering at a design firm.

This highly qualified project and construction management expert has over 30 years of professional experience in his field. He received his BS in industrial engineering and technology from East Central University and his MBA from Robert Kennedy College. He is a certified facilitator of incident and root cause analysis investigations and is certified by OSHA in construction safety. He has published over 15 papers, publications and manuals related to topics in his field. Formerly, this expert has held roles as a contractor at Willbros International and Parsons E&C. Additionally, he has served as a construction manager at Parsons/Enron International, as a contracted engineer at Willbros Engineering, a senior advisor for Frontier Energy, LLC., and as a senior construction consultant at Keystone XL Pipeline. Currently, this expert is the vice president of planning at an OK energy service.

This highly-qualified expert has over 40 years of experience in the field of electric power generation EPC (engineering procurement construction), renewable technologies, and engineering contracts both in the US and internationally. He received his BS in general engineering from the United States Military Academy before earning his MS in nuclear engineering from MIT and his MBA in finance from the University of Santa Clara. This expert is currently a licensed professional engineer in the state of Kansas. For 22 years, he worked with Black & Veatch Engineers and Contractors, holding a variety of roles including, analyst and section head of system planning, project manager of both owner/engineer projects and Turkey power generation projects, and division head of the Asia power division. This expert then went on to serve as the vice president of construction for Aquila, the managing director of technical support for TYR Energy, and the site and construction manager for Forge Group in Australia. Currently, this expert serves as a consultant for an engineering consultancy, reviewing engineering contracts both in the United States and internationally.

This well-qualified engineer has nearly four decades of experience in civil and transportation engineering, construction, and resource management. He received his BS and MS in civil engineering from Oklahoma State University. He is a licensed engineer in the state of Oklahoma and is also a certified flood plain manager. In addition, he is a member of professional organizations such as the American Public Works Association, American Society of Civil Engineers, and National Society of Professional Engineers. Previously, this expert held roles such as senior engineer, vice president, director of district facilities, operations manager, and director of engineering & construction. Currently, he serves as the president of a civil engineering firm, as a county engineer in OK, and as an adjunct instructor of civil engineering for a university in OK.

This highly qualified mechanical engineer has been in his field for more than 35 years, with demonstrated experience in structures and materials, process control technology, and the power industry. He earned his MS in mechanical engineering from Iowa State University and his EMBA from Southern Methodist University. He is a fellow and member of both the American Society of Mechanical Engineers and the International Society of Automation and a registered professional engineer in Iowa. He holds 11 patents related to control valve design and maintenance and has published a book and several technical articles on control design, installation, and maintenance. He worked with Fisher for over 15 years in various roles, as a product engineer, a nuclear liaison engineer, a senior project engineer, and finally as vice president of global nuclear business. This expert is currently a consultant at an independent mechanical engineering company.