Mechanical Engineering Expert Witnesses

This highly-qualified expert has 15 years of experience in the field of engineering, with his work focused on mechanical equipment and system failure, as well as material failure analysis. He earned his BS in mechanical engineering from Louisiana Tech University and is licensed as a professional engineer in 6 states and 2 Canadian provinces. He holds several certifications, including certification as a welding inspector, an aerial lift operator, and a forklift operator. This expert is active in his field as a member of the American Society of Mechanical Engineers, the American Society of Plumbing Engineers, and the International Fluid Power Association. He has formerly served as a project coordinator for Cameron International, the responsible engineer at WorleyParsons, a project engineer, forensic engineer, and a fire investigator for EF Consulting. Currently, this expert is a senior forensic engineer for a forensic engineering and failure analysis firm in Louisiana.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

This expert has over 40 years of experience as a mechanical engineer. In addition to contributing to over 200 presentations in 38 countries, he has been extensively published in his field and is an established expert in forensic mechanical engineering. His expertise includes accident investigation and medical device liability. He now serves as a Senior Forensic Consultant for a biomechanics and biomedical engineering consulting firm.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This expert received his BS and MS from the Mechanical Engineering Department at MIT and is a licensed engineer in NY and CT. He currently works as a forensic/consulting engineer at a private engineering firm. His investigative and analytic experience includes motor vehicle accident reconstruction, biomechanics, product design and safety, and computer simulation and animation. He has also served as a member of the ANSI/NGCMA Z130.1 engineering specifications committee.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This expert has over 40 years of experience as a mechanical engineer. His research in tribology, machining of advanced materials, medical device design, dental materials, and high temperature coatings is widely recognized in the scientific and engineering communities. He has published over two hundred fifty papers and reports related to machining of ceramics, mechanisms and mechanics of interfaces, wear and friction, boundary lubrication, and biotribology; and has given more than three hundred lectures on these subjects. He has served as President and CEO for a heart pump developer, a subsidiary for a product company where he served as Vice President of Biotechnology.

This expert has over 25 years of experience in the motorcycle dealership industry, primarily with Harley-Davidson motorcycles. His roles have spanned technical service and operations. In addition to serving as an expert witness and technical consultant, he manages a team of service professionals as the Service Operations Manager for a Harley-Davidson dealership.

This highly qualified expert has over 30 years of experience as an engineer. He received a B.S. in Mechanical Engineering from the Georgia Institute of Technology and is a Registered Professional Engineer in 9 states. A member of both the American Society of Mechanical Engineers and the National Academy of Forensic Engineers, he has published several articles on various issues including cranes and plumbing failures. He previously worked for Georgia Power Company where he maintained different plant aspects and addressed deficiencies. He also worked at Cerny & Ivey Engineers, Inc. where he managed the engineering and technical staff as well as mechanical/electrical/structural engineering and testing responsibilities. He currently serves as President and Principal Engineer for an engineering company that consults in failure investigations, safety, design, and products and materials testing.

This engineer is an expert in the areas of fire causation and consumer product defects as well as construction materials and workmanship issues. He has specific expertise with installation and maintenance of household appliances including stoves and ovens. He belongs to a number of societies in the engineering field including the American Society of Mechanical Engineers and the National Academy of Forensic Engineers. He is currently a private engineer specializing in design, failures, building code and ADA compliance issues, and human factors.

This highly qualified aeronautics expert earned his masters and PhD in Aeronautics and Astronautics from MIT. He is a fellow in the American Society of Mechanical Engineers, and an associate fellow in the American Institute of Aeronautics and Astronautics. He has authored more than 100 publications in the aeronautics space and is currently a Professor of Aerospace Engineering at a top midwest university.

This accident reconstruction expert earned a masters degree in kinesiology from California State University Northridge and a PhD in Biomedical Engineering from UCLA. He is a certified traffic reconstructionist and specializes in accident reconstruction and biomechanics for transportation related accidents (trains, subways, motor vehicles, buses, etc). He belongs to numerous prestigious societies in his field, including the National Association of Traffic Accident Reconstructions, National Association of Railroad Safety Consultants and Investigators and the International Society of Biomechanics. He is currently the President of an Accident Reconstruction & Biomechanics firm.

This expert has over 35 years of forensic engineering experience, and he has investigated and worked up more than 100 cases in each area of slip/trip/miss and fall, accident reconstruction and crash analyses, and product failure. He has published papers in the Journal of the National Academy of Forensic Engineers (NAFE). He has long been active in professional societies and is a past chairman of several. He has been listed in Who's Who in Engineering and Science. He has given expert witness testimony in Federal Courts, State Courts, Local Courts, Arbitration Hearings, and in depositions.

This highly qualified expert holds both a Bachelors and a Masters degree in Mechanical Engineering from the University of South Carolina where he was summa cum laude. He is a Certified Plant Engineer and a Certified Training Instructor for Aerial Work Platforms and Rough-Terrain Forklifts. He was enlisted in the United States Navy for 12 years where he was responsible for operating, repairing, and managing nuclear power plants and personnel. He has also served as Director of Engineering, Chief Engineer and has also held the position of Senior Design engineer responsible for manufacturing and new product development. Through his work experiences, he gained an extensive background in welding and fabrication of products and he manages his current company's product testing lab, specifically treestands and associated equipment. He is a member of the National Society of Professional Engineers, American Society of Mechanical Engineers, American Society of Civil Engineers and a Certified Fire Protection Specialist. He has also earned numerous Navy and Marine Corps medals.

This expert's skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. He is a fellow of the National Society of Professional Engineers and currently consults on a number of mechanical engineering projects.

This EDR expert is a principal at a vehicular accident reconstruction consultancy. He retired from law enforcement after a twenty-five year career, during which time he investigated over 2500 motor vehicle collisions. Fourteen of those years he served with the Bergen County (NJ) Prosecutor's Office Fatal Accident Investigation Unit. This expert earned a degree in mechanical engineering, summa cum laude, from the New Jersey Institute of Technology and he is ACTAR accredited. He has testified as an expert in depositions and trials. He participates in crash testing with the University of Tulsa Crash Reconstruction Research Consortium and the University of North Florida. This expert teaches advanced accident reconstruction classes and lectures throughout the country at accident reconstruction conferences. He has performed more than 100 EDR downloads.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This expert has published extensively in magazines, in-house journals, and textbooks. He is a participating member of numerous societies. He has over 40 years personal experience in management, consulting and expert services in the fields of design, manufacturing, testing of hydraulic, pneumatic and electro-mechanical lifting and load bearing machines, equipment and devices: industry experience including automotive, construction, industrial, material handling, warehousing and transportation: forensic engineering including product liability, accident investigation, reconstruction and expert testimony: incidents involving industrial trucks, aerial work platforms, forklifts, telehandlers, tuggers, pallet jacks, automatic storage and retrieval systems, dock boards, dock levelers, trailer restraints, trailer jacks, racks, conveyors, overhead bridge cranes, trucks, shop cranes, scissors lifts, shop cranes, automatic doors and lift gates: heavy equipment involving telehandlers, powered industrial trucks, automatic storage and retrieval systems, gantry cranes, truck cranes, tower cranes, cranes with hydraulic booms, cranes with lattice booms, grapple and magnet equipped excavators, and side boom cranes: conformity issues involving environmental, health and safety, warnings, instructions, training conformity with recognized standards, codes, industry custom and practice and government regulations.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.