Mechanical Engineering Expert Witnesses

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This expert has published extensively in magazines, in-house journals, and textbooks. He is a participating member of numerous societies. He has over 40 years personal experience in management, consulting and expert services in the fields of design, manufacturing, testing of hydraulic, pneumatic and electro-mechanical lifting and load bearing machines, equipment and devices: industry experience including automotive, construction, industrial, material handling, warehousing and transportation: forensic engineering including product liability, accident investigation, reconstruction and expert testimony: incidents involving industrial trucks, aerial work platforms, forklifts, telehandlers, tuggers, pallet jacks, automatic storage and retrieval systems, dock boards, dock levelers, trailer restraints, trailer jacks, racks, conveyors, overhead bridge cranes, trucks, shop cranes, scissors lifts, shop cranes, automatic doors and lift gates: heavy equipment involving telehandlers, powered industrial trucks, automatic storage and retrieval systems, gantry cranes, truck cranes, tower cranes, cranes with hydraulic booms, cranes with lattice booms, grapple and magnet equipped excavators, and side boom cranes: conformity issues involving environmental, health and safety, warnings, instructions, training conformity with recognized standards, codes, industry custom and practice and government regulations.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.

This expert is a nationally renown expert in automotive engineering and currently is Professor of Mechanical Engineering at a top ten automotive design and engineering school, where he also holds the position of Director of Center for Vehicle Systems and Safety and the Railway Technologies Laboratory. This expert is the founding director of the Virginia Institute for Performance Engineering and Research and the Advanced Vehicle Dynamics Laboratory. He has authored more than 200 technical publications, and has made more than one hundred technical presentations in topics related to advanced technologies for ground vehicles. He holds seven U.S. and international patents, and has edited three technical volumes. He is currently Associate Editor of AIAA Journal and the journal of Shock Vibration, and has served as Associate Editor for ASME Journal of Vibration and Acoustics. This expert is a Fellow of American Society of Mechanical Engineers and a member of the Society for Automotive Engineers. He earned his PhD in Mechanical Engineering at State University of New York at Buffalo.

This highly qualified expert has 25+ years of experience in Engineering and has specifically focused on investigations and forensics for the last 15+ years. He earned his B.S. and M.S. in Mechanical Engineering from Ohio State University, and he has published over 35 papers and reviews and is a patent owner of 2 products. He belongs to the American Society of Heating, Refrigeration, and Air Conditioning Engineers, the National Safety Council, and the National Council of Examiners for Engineering & Surveying to name a few. While managing the Mechanical Department at Matrix Technologies, this expert prepared detailed engineering packages and programs for refrigerators and HVAC installations. He also served as the Chief Engineer at Thermo Mechanical Systems Co, where he assisted in the design of refrigeration and heating systems.

This expert's major practice area involves the scientific investigation of accidents resulting in injury. He utilizes the information provided by injuries and mechanical failure of objects to reconstruct the events of an accident and answer questions related to liability. He holds a BS and MS in Mechanical Engineering from Michigan State University and a PhD in Biomedical Engineering from Drexel University. This expert is a licensed professional engineer and has published numerous peer-reviewed journal articles and abstracts. He has presented scientific findings at both medical and engineering conferences. Currently, this expert is the principal engineer of a consulting firm focusing on the forensic investigation of accidents.

This expert joined the Departments of Bioengineering and Mechanical Engineering at a major TX University in June 2013 as an Assistant Professor. Prior to joining that university, he was a Research Scientist at the Rehabilitation Institute of Chicago and a Postdoctoral Fellow at Northwestern University. This expert investigates the control mechanisms of human locomotion for the development of high-performance wearable control systems (e.g., robotic prostheses and orthoses) to enable mobility in persons with disabilities. He is a recipient of the NIH Director's New Innovator Award and the Career Award at the Scientific Interface from the Burroughs Wellcome Fund. His work has been recognized with the Best Student Paper Award of the American Control Conference and the IEEE Conference on Decision & Control, the Best Technical Paper Award of the 2011 CLAWAR Conference, and the O. Hugo Schuck Award from multiple control conferences and councils, respectively. He is a Senior Member of the IEEE Control Systems Society and the IEEE Robotics & Automation Society.

This expert has more than 30 years experience investigating water heater, valving, piping, and injuries related to steam and water pressure. He earned his bachelors and masters degrees in Physics from Georgia Tech and is highly regarded in his field. He is currently the Principal of a mechanical engineering firm that investigates industrial steam accidents, provides consulting to operators of high pressure steam systems experiencing water hammer, and provides seminars to operators and engineers on understanding water hammer in steam systems.

This expert is a registered professional mechanical engineer with extensive hands-on experience in thermodynamics and testing. He earned his Masters and PhD in Mechanical Engineering from Georgia Institute of Technology. He has held a number of engineering positions and is currently a Professor of Mechanical Engineering focusing on thermodynamics at a technical university in the Atlanta area. Primary activities have focused on basic and applied research in the areas of constitutive model development and processing, mechanical property characterization, and structural testing & analysis for advanced materials including high performance and ultra-lightweight polymers, polymeric composites, and metals. Specifically, areas of expertise include formulating new constitutive relationships and associated experimentally-based methodologies for characterizing the time, rate, environmental, and temperature dependent mechanical response of materials; the development of laboratory testing techniques and instrumentation for investigating and determining structural and material behavior, low velocity impact effects, and related phenomenological events in composites; and the development of analytical and numerical methods for characterizing and modeling the environmental degradation, long-term durability, and damage tolerance of polymer matrix composites and MEMS structures. Current topics include experimental mechanics, MEMS, structural analysis and design, rheology, thermochemical analysis, fatigue life assessment and prediction, micromechanics and long term durability.

This highly qualified expert has years of experience in dynamics and control of automotive and manufacturing systems. He received his MS degree in mechanical engineering from Cornell University and his PhD degree in mechanical engineering from the University of California, Berkeley. He is a member of the US National Academy of Engineering. He is a fellow of 4 renowned associations: the Institute of Electrical and Electronics Engineers, the International Federation of Automatic Control, the Society of Manufacturing Engineers and the American Society of Manufacturing Engineers. He is also the past president of the American Automatic Control Council. His impressive work as an engineer has earned him multiple honors, including the Society of Manufacturing Engineers's "Outstanding Young Manufacturing Engineer" award and the International Symposium on Flexible Automation's "Hideo Hanafusa Outstanding Investigator" award. He has published 190+ refereed journal articles and is the founding editor of ASME Dynamic Systems and Control magazine. He is the former founding director of the Ground Robotics Reliability Center, the Program in Manufacturing and the National Science Foundation Engineering Research Center for Reconfigurable Machining Systems at the University of Michigan. He is also the former chair of the department of mechanical engineering and the former deputy director of the NSF Industry-University Cooperative Research Center for Dimensional Measurement and Control in Manufacturing at the same institution. Currently, he is a distinguished professor emeritus of mechanical engineering at a major university.

Please see full CV

This expert is a Professional Engineer and possesses over 30 years of engineering experience. He specializes in Failure Analysis, Metallurgical Testing, Fatigue Testing, Welding and Brazing Qualification. Prior to founding his current professional engineering consulting firm, he was the successful owner of a mechanical testing laboratory in Cincinnati, OH. This firm was a mechanical & metallurgical testing laboratory, handling clients from the Aerospace, Medical, Materials Handling, Welding and Defense industries. He is a member of ASTM, is on the F04.25 subcommittee on medical devices and recently co-sponsored ASTM F2077 revision.

This highly qualified expert earned his B.S. and M.S. in Mechanical Engineering and a Ph.D. in Biomedical Engineering from Marquette University. From 1977 until 2010, he held increasingly senior roles within Baxter Healthcare Corporation, most recently serving as the Technical Director of Applied Science & Technology. He was an Adjunct Professor at Northwestern University and spent four years at Exponent before becoming an independent consultant. The expert is a registered Professional Engineer in Illinois and has received 17 U.S. patents.

This industrial technology executive has 24+ years of experience in technology and engineering roles. Most recently, he was the Vice President of Innovation & Technology at Parker Hannifin from 2006 until 2016. The expert also held roles with AdobeAire and Newell. He is involved in industry and university groups, including ASHRAE and the Air Conditioning Research Council. He has received 28 U.S. patents and has considerable experience with R&D and IP strategies. The expert earned his Bachelor of Mechanical Engineering in Manufacturing and Management from the University of Birmingham and his M.B.A. from the State University of New York College at Buffalo.

This Professional Engineer has conducted numerous forensic investigations including mechanical failures, construction accidents, products and premises analysis and over 750 vehicular accidents involving pedestrians, bicyclists, work zones, and passenger and commercial vehicles. He is a member in good standing with the Chi Epsilon Engineering Honor Society for exceptional academic achievement and a selected member of the Order of the Engineer. He is a Certified Structural Masonry Inspector and earned a BS in Mechanical Engineering and a Masters Degree in Civil Engineering with an emphasis in Construction and Traffic Engineering from the University of Florida, and a certificate for Advanced Crash Reconstruction from Northwest University.

This expert is an Assistant Professor of Mechanical Engineering in the Department of Mechanical Engineering at a TX university and a transportation research faculty. She joined the department in 2011 after post-doctoral fellowships at Oak Ridge and Pacific Northwest National Laboratories. She received her Ph.D. from the University of Wisconsin-Madison, and completed her dissertation research in residence in the Fuels, Engines & Emissions Research Group at Oak Ridge National Laboratory. She teaches undergraduate courses in thermodynamics, heat transfer, thermal fluids analysis, engineering ethics, and senior capstone design. She teaches graduate courses in thermodynamics, heat transfer and combustion science. Her research interests are in the area of sustainable energy & environment. Specifically, she studies automotive emissions aftertreatment and remediation of heavy hydrocarbon contamination in soils by applying a suite of chemical and physical characterization techniques.

This expert holds a Mechanical Engineering degree from McMaster University ('93) and a Masters from the University of Toronto ('98). From 2000 to 2013 this expert was a managing partner of HITE Engineering Corp. Prior to that he held diverse positions in manufacturing. He is skilled in mechanical design and structural analysis/FEA and fully trained on engineering software packages such as AutoCAD, SolidWorks, Algor and STAAD/Pro. Early in his career, he began utilizing machine guarding standards and has since become an expert on CSA, ANSI, NFPA and EU standards on machine guarding, safety circuit design and fire and explosion protection. Since 2000, he has been involved in numerous forensic investigations and design reviews of construction equipment, including cranes, elevating work platforms, etc. He has been qualified as an expert witness in court on multiple occasions.

This highly qualified mechanical engineer earned his BS in Mechanical Engineering from City College of New York, his MS in Mechanical Engineering from Rensselaer Polytechnic Institute, and his PhD from the University of Connecticut. He has been formally trained in a number of engineering disciplines, including accident investigation and labels/warnings/failure to warn instructions. He belongs to a number of highly prestigious societies in the engineering field, including the International Code Committee and the American Society of Safety Engineers. Additionally, he possesses in-depth knowledge to reach the root cause of a wide range of accidents and failures in the following areas: turbines, human performance, operator training, man-machine interface, material science, structures, statics, dynamics, pneumatics, hydraulics, lubrication, fire protection sprinkler systems, elevators, cranes, hoists, escalators, aerial platforms, fork lifts, warning labels and instructions, failure to warn, OSHA standards and requirements, heat transfer and thermodynamics. This expert currently serves as an engineering consultant.

This registered Professional Electrical Engineer and Professional Control Systems Engineer earned his BS in Mechanical Engineering from the Massachusetts Institute of Technology and his MS in Electrical Engineering from Stanford University. He holds more than 25 US patents and is an active member of the Institute of Electrical and Electronics Engineers as well as the National Fire Protection Association. For a number of years he served as the Chief Engineer at the Tyco Corporation, developing heat tracing technologies. Since 2008, he has operated an independent San Francisco Bay Area consultancy specializing in electrical and mechanical engineering.