Engineering Expert Witnesses in Idaho

This highly qualified expert is a nationally renown authority in toxicology. He received his Ph.D. in pharmacology from the University of Kansas Medical Center. He has served as Toxicology Program Director in the Department of Environmental Health at the University of Washington, then as Associate Chairman of the Department, as Associate Dean for Research in the School of Public Health, and Associate Vice Provost for Research. He is currently Dean and Vice Provost of the Graduate School at the University of Washington. This expert continues his academic appointment as Professor Environmental and Occupational Health Sciences, and Public Health Genetics. He has served as the founding director of the Center for Ecogenetics & Environmental Health, an NIEHS Core Center of Excellence. Nationally, he has served on the Board of Directors and as Treasurer of the American Board of Toxicology, and as President of the Society of Toxicology. He has also served on the Board of Environmental Studies and Toxicology, National Academy of Sciences /National Resource Council, as a member of the Board of Directors and Vice-President of the Toxicology Education Foundation, and on the Board of Trustees of the Academy of Toxicological Sciences. He is an Elected Fellow of the American Association for the Advancement of Science and the Academy of Toxicological Sciences. This expert was elected to the Institute of Medicine of the National Academy of Sciences, and to the Washington State Academy of Sciences. He has published over 150 scientific articles and book chapters in the field of toxicology and risk assessment. He is the sole author of a widely used Law Review article titled on scientific judgment and toxic torts.

This expert's skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. He is a fellow of the National Society of Professional Engineers and currently consults on a number of mechanical engineering projects.

This highly qualified engineer earned his BS and MS in mechanical engineering from California Polytechnic State University. He went on to earn his PhD in mechanical engineering from the University of California, Berkeley. He has over 10 years of experience conducting failure analysis for various products including biomedical devices. He formerly served as Principal Mechanical Engineer at COR Innovations, Inc., a biomedical device start-up. In this role, he was responsible for designing multiple functioning prototypes and designing and fabricating numerous electromechanical bench top apparatus' for materials testing and validation. He went on to serve as Senior Staff R&D Engineer at Abbott Vascular Structural Heart, where his primary role was serving as technical lead for improvements in their MitraClip device. He currently serves as Chief Technology Officer and co-founder of a medical device company that is focused on treating vaginal atrophy in breast cancer survivors and post-menopausal women through a novel and hormone-free, energy based therapy.

This qualified Fluid Flow Engineering Expert obtained his BSE in Civil Engineering and his MSE and Ph.D in Civil and Environmental Engineering from Utah State University. He is a Certified Engineer in Utah and has published 40+ articles focused on Civil and Environmental Engineering research. He is a member of the American Water Works Association and the American Society of Engineers and is currently a Research Professor in Civil and Environmental at a University in the West, a Civil and Environmental Engineer at a Water Research Laboratory, and a Consultant at a Private Consulting Firm. Expert has provided testimony and technical reports as well as external review of technical reports and analysis.

This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a roller coaster and amusement ride design consultancy firm. He has been involved in the design of numerous roller coasters and other amusement rides. Prior to forming this consultancy, he served as Chief Engineer for S&S Power, one of the largest and most innovative amusement ride manufacturers in the world. He can speak to finite element analysis, dynamic systems analysis, mechanical design, launch systems, coaster train design, restraint design, pneumatics, hydraulics, data acquisition, data analysis, technical project management, specialty computer programming, and testing in the amusement industry.

This expert is a full professor of Mechanical Engineering at a prominent university in the Western US. He received his PhD in Welding and Materials Engineering from The Ohio State University. Prior to joining academia, he worked as a research assistant at Edison Welding Institute and as a materials engineer at Westinghouse-Power Generation. His research interests are in the area of materials joining, materials characterization, and the relationships between microstructure and mechanical properties.

This highly qualified engineering expert has extensive experience in his field. For the past 30 years, he has had specific experience in the mining and metal industry, pipeline engineering, and oil hydrocracking, to name a few. He received his BS in aeronautical engineering from the University of London and his MS in materials engineering from American University in Cairo, Egypt. This expert currently has 9 established patents. He has published over 20 journal articles and one book. Formerly, he has held roles as a senior mechanical engineer at Warman Pumps and Bateman Engineering. Additionally, this expert has served as a consultant for Sulzer Pumps North America, and as a former principal engineer and technical director at Fluor. Currently, this expert is a self-employed engineering consultant serving top clients across various industries.

This expert has over 30 years of experience in biomechanical engineering. He earned a BS and MS in engineering mechanics, as well as a PhD in applied mechanics in bioengineering, from the University of Wisconsin - Madison. He has published over 80 peer-reviewed journal articles, books and book chapters and holds privileges as a peer-reviewer for several biomechanical engineering journals. In addition, he is a member of numerous professional societies including the American Society of Biomechanics and the Biomedical Engineering Society. Previously, he served as an assistant professor of biomedical engineering at Worcester Polytechnic Institute and an associate professor of mechanical and materials engineering at Portland State University. Currently, he is a professor of biomaterials and biomechanics at a university in Oregon and is the owner and principal investigator at a bioengineering firm.

This expert has extensive experience in the amusement ride industry. He earned his BS in mechanical and aerospace engineering from Utah State University. He is a licensed structural engineer and professional engineer. He was the engineer of record for two notable commercial amusement rides and has experience in material handling and structural design. Currently, he is the president of an engineering design company that designs amusement park rides.

This highly-qualified expert has over 25 years of experience in the field of marine engineering, naval architecture, and shipbuilding. He has lead teams performing analysis of stability, structure, performance, safety, and accessibility. Additionally, he works directly with shipyards throughout North America during the construction process to assess quality and schedule performance and ensure compliance with contract specifications. He earned his BS in mechanical engineering from the University of Washington and is a licensed professional engineer in naval architecture and marine engineering in two states. This expert is also a certified project management professional. He is active in his field as a member of the Society of Naval Architects and Marine Engineers and the American Waterways Organization. This expert currently serves as the principal in charge and technical director for a marine engineering and design firm in Washington State that he has worked with for the past 26 years.