Engineering Expert Witnesses in Delaware

This HVAC expert is the president of of an engineering consultancy. He has extensive experience in the design of piping, duct, mechanical, plumbing and fire protection systems for new and retrofit commercial and institutional buildings. This expert has experience working on projects ranging from small to large; project complexity ranges from simple office tenant, retail and hotel projects to base building, to museum renovations. His design experience includes chillers, boiler, steam and central air handler systems, low temperature air, thermal storage and desiccant systems, as well as simple split DX, rooftop and PTAC systems. This expert has performed a range of services from due diligence surveys, economic analyses, concept design, construction documents and construction administration. He earned his BS in Mechanical Engineering at Washington University and MS in Mechanical Engineering at the Massachusetts Institute of Technology. Presently, this expert is the President of an independent engineering consultancy.

This highly qualified professional engineer earned a BS at Seton Hall University, an MS in Electrical Engineering at University of Maryland, an MS in Business Management at Florida Institute of Technology, and a PhD in Electrical Engineering at the New Jersey Institute of Technology. He specializes in audits, programs, and training for electrical safety, as well as compliance review and testing for product safety. He has reviewed a number of cases involving electrical/battery fires, electrocution/electrical accidents, lightning, and safety. He belongs to a number of prestigious institutions in the electrical engineering field, and currently serves as the principal consulting engineer at his own private engineering and consultancy firm.

This expert is a licensed professional engineer in New Jerseym and has more than 30 years experience in the defense industry. He is trained and knowledgeable in gps tracking and audio and visual surveillance.

This engineering expert obtained his BS in Civil Engineering, with a specialization in Construction Management, and his MS in Structural Engineering from Stevens Institute of Technology. He is licensed as a Professional Engineer and a Structural Engineer in over 25 states and is certified by the Structural Engineering Certification Board. He is a member of ASCE, ACI, AISC and a Fellow of SEI. He serves as Chair of the ASCE SEI Business Practices Committee. He also serves on the Board of Trustees for Stevens Institute of Technology and the Board of Governors of the Structural Engineering Institute. He has 6 publications and is currently the Principal Engineer for a structural and forensic engineering firm.

With over 30 years of automotive engineering experience, this expert has dedicated his career to the field of accident reconstruction. Holding Masters and Doctoral degrees in automotive mechanical engineering and highway safety, he is a recognized expert whose clients have included U.S., State and Foreign Governments. He has extensive court experience, having been deposed and testified in approximately 200 trials, while he has acted as an automotive engineering consultant in more than 3,000 vehicle crash cases.

This expert has more than 35 years of experience in safety, industrial hygiene, OSHA, construction management, chemical plant, pipefitting, warehouse operations, forklifts, and slip, trip, and falls. He earned a masters degree in safety management from the Indiana University of Pennsylvania and is a certified safety professional. He is currently a private consultant for an environmental health and safety company and Retired Faculty, OSHA Consultation Program at a Indiana University in PA

This expert has over 40 years of experience as a mechanical engineer. In addition to contributing to over 200 presentations in 38 countries, he has been extensively published in his field and is an established expert in forensic mechanical engineering. His expertise includes accident investigation and medical device liability. He now serves as a Senior Forensic Consultant for a biomechanics and biomedical engineering consulting firm.

This expert holds a doctorate degree in toxicology and has been a practicing toxicologist for over 40 years. Board certified by the American Board of Toxicology and a Fellow of the Academy of Toxicological Sciences, he had published over 35 scientific articles and is a former president of the Mid-Atlantic chapter of the Society of Toxicology. He spent over 30 years as a Director of Toxicology for two major pharmaceutical companies and currently serves as an independent toxicology consultant.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This expert is an independent safety consultant out of the UK. For the past 27 years, he has worked in a variety of engineering environments to ensure that UK/EU safety standards were upheld. He is familiar with the UK factory safety standards and product safe design standards and has the appropriate experience to help with this case. He has worked large engineering companies to ensure their compliance with the Health and Safety at Work Act, CE Marking Directives and PUWER.

This expert has over 40 years of experience as a mechanical engineer. His research in tribology, machining of advanced materials, medical device design, dental materials, and high temperature coatings is widely recognized in the scientific and engineering communities. He has published over two hundred fifty papers and reports related to machining of ceramics, mechanisms and mechanics of interfaces, wear and friction, boundary lubrication, and biotribology; and has given more than three hundred lectures on these subjects. He has served as President and CEO for a heart pump developer, a subsidiary for a product company where he served as Vice President of Biotechnology.

This expert has over 25 years of experience in land surveying. He received a B.S. in Environmental Management from the University of Maryland. Most of his positions have consisted of leading survey field crews for various projects. His expertise includes boundary work, ALTA/ACSM surveys, topographic surveys, and platting. He currently serves as a Land Surveyor and Team Leader for a consulting firm that provides land surveying services.

This highly qualified expert has a BS in engineering and an MS and PhD in civil engineering. He is a registered Professional Engineer and a former OSHA instructor. His current position as President of Engineering requires him to oversee the entire operations of his firm from an engineering and environmental perspective. He has extensive experience working with roll off dumpsters and construction.

This expert received his Masters degree in 1997 at McMaster University and in 2004, he was awarded his PhD from Carleton University. His PhD contribution resulted in significant changes in the 2005 National Building Code of Canada, NBCC. During his graduate studies, he taught several courses including Engineering Mechanics, Surveying, Highway and Transportation, Bridge Design, and Properties of Material. He joined Alfred Benesch & Company, a consulting company in the US, as a lead bridge engineer. He gained over seven years of bridge design experience. He has wide experience in bridge rehabilitation and design, and is knowledgeable in American Association of State Highway and Transportation Officials (AASHTO), and Federal Highway Association (FHWA) policies and design standards. His personal experience includes highway bridge analysis and design, rehabilitation and construction, and scour analysis for bridges.

This highly qualified expert holds both a Bachelors and a Masters degree in Mechanical Engineering from the University of South Carolina where he was summa cum laude. He is a Certified Plant Engineer and a Certified Training Instructor for Aerial Work Platforms and Rough-Terrain Forklifts. He was enlisted in the United States Navy for 12 years where he was responsible for operating, repairing, and managing nuclear power plants and personnel. He has also served as Director of Engineering, Chief Engineer and has also held the position of Senior Design engineer responsible for manufacturing and new product development. Through his work experiences, he gained an extensive background in welding and fabrication of products and he manages his current company's product testing lab, specifically treestands and associated equipment. He is a member of the National Society of Professional Engineers, American Society of Mechanical Engineers, American Society of Civil Engineers and a Certified Fire Protection Specialist. He has also earned numerous Navy and Marine Corps medals.

This expert earned his PhD in mechanical engineering/aeronautical sciences from the University of California Berkeley and has authored numerous publications in the mechanical engineering and biomedical engineering space. He is a member of the Society of Automotive Engineers and has held numerous professorships relating to multiple facets of engineering. He is the former co-director of the DOT program for motor vehicle trauma at the UCLA schools of engineering and medicine. Currently, this expert is a senior forensic consultant focusing on biomechanics and biomedical engineering.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.

This highly qualified expert is an electrical engineer by training with forensic experience in electronic communications and control systems. He has 40 years of industry experience and has authored 20+ peer-reviewed technical publications. This expert has extensive expert witness experience in cases involving mobile telephone systems, electronic surveillance systems, industrial machinery, and automotive electronics. Currently, he operates a forensic engineering consultancy specializing in electrical devices and electronic systems. His geographic area is the eastern USA.

This biomedical and biomechanical expert spent over 15 years as a Professor at Johns Hopkins University and over 20 years as a member of their Applied Physics Laboratory. He has worked in biomedical implant analysis and design, materials biomechanics, and laminated composite analysis and design. He earned a B.S and M.S. in Mechanical Engineering from the University of Michigan, as well as a Ph.D. in the same field from Rensselaer Polytechnic Institute. The expert was named a Fellow in the American Society of Mechanical Engineers in 2010 and was selected as the Specialty Chief Editor of the Frontiers online journal Biomechanics in 2013. He has written three book chapters, co-authored 100+ peer-reviewed publications, conference proceedings and presentations, and received 16 patents, including patents involving hip replacements dating back to the 1980s. He currently runs his own consulting firm specializing in composite design and analysis, biomechanics of impact, structural design and analysis, and proposal writing.

This licensed Professional Engineer currently works as a Chemical/Mechanical Forensic Engineer for a multi-disciplined engineering and investigation company. Provides forensic and technical services to attorneys, insurance companies, independent adjusters, restoration companies, contractors, municipalities, and individuals towards the resolution of claims or litigation. Areas of Expertise: Chemical process design, mechanical equipment applications and safety controls, manufacturing, and production, including: chemical, petrochemical, polymer plastic production, refrigeration, coal, coke, steel making, material handling and pneumatic conveying; gas, dust and chemical explosions; hazardous chemical exposures; over-pressurization explosions; nuclear waste processing; water treatment; power and fuel engineering; heating, ventilating, air conditioning, and humidification, including boilers and related safety. Provided expert opinions in over 1,000 forensic cases and provided court testimony, when required. He has considerable background investigating the proximate cause of fires and/or explosions involving electrical and mechanical appliances such as stoves, dishwashers, conditioners, toasters, and others. The expert previously worked for Robson Lapina Inc.; Vice President at KMS Forensic Engineering Consultants, and as the Chief Engineer and Project Manager for A.R.C. Technologies Corporation.