Elevators and Escalators Expert Witnesses in Oregon

This highly-qualified engineering expert has over three decades of experience in his field. He earned a BS in civil engineering from National Technology University. He went on to earn an MS in civil engineering, an MS in aeronautics and astronautics, and a PhD in mechanical engineering from the Massachusetts Institute of Technology. He is active is in field as the author of numerous engineering publications and the founder and director of several engineering laboratories focusing on surface mechanics. Formerly, he served as a professor of mechanical and industrial engineering at the University of Illinois Urbana-Champaign. Currently, this expert is a principal investigator at a technological research institute, a faculty materials scientist at a DOE-affiliated research laboratory, and a professor of mechanical engineering at a distinguished university in California.

This expert has over 32 years as an Accident Reconstructionist and Forensic Engineer, and is ACTAR Accredited. He is a certified Crash Data Retrieval (CDR) technician, operator and data analyst. He is a former Chair of the Engineering Sciences section and Fellow of the American Academy of Forensic Sciences, and a member of 5 additional forensic groups including CAARS, NAPARS, SAE, SATAI and SOAR. He has 100 publications and presentations in the field of forensic automotive engineering and is currently the owner of an Accident Reconstruction firm.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This expert's skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. He is a fellow of the National Society of Professional Engineers and currently consults on a number of mechanical engineering projects.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This highly qualified expert earned her BA in Government & International Relations from Clark University and has been serving in facilities management for approximately 8 years. She has held various facilities management positions, starting as a facilities representative and working her way up to management. She formerly served as a Facilities Representative with Starbucks, a Facilities Coordinator with Expedia, and currently serves as a Facilities Manager at a major retail corporation. She has had extensive experience with and understands the process in determining how products should be maintained and she has specifically maintained motorized shades as they have been used in the facilities that she has managed.

This well credentialed expert earned his B.S. and M.S. in Mechanical Engineering from Cal State Fullerton and his Ph.D. in Civil Engineering/Structural Mechanics from UC-Irvine. He is a Professional Engineer in the state of California and has 46 U.S. patents issued in his name. Prior to starting his own engineering consulting firm, he was the Vice President of Engineering at Hartwell Corporation and the Vice President of Research and Development at Textron Aerospace Fasteners. He is a member of several industry organizations, including the National Society of Professional Engineers and the American Society of Mechanical Engineers.

This expert has about 10 years experience in property management. He has vast experience as a property portfolio manager where he was responsible for asset management, building code compliance, and real estate/insurance appraisal. He is currently the Director of Community Association Management for the Pacific Northwest at a California based property management company.

This seasoned expert has been involved in the diving industry since the 1970s. He earned his B.S. in Mechanical Engineering from the University of California, Santa Barbara and also completed additional graduate work in Human Physiology and Exercise Physiology at both California State University, Long Beach and California State University, San Diego. The expert is certified as a Scuba Instructor by the National Association of Underwater Instructors, the Los Angeles County Underwater Unit, and the Professional Association of Diving Instructors. He previously worked as the Chief Engineer of Water Sports at AMF Voit, the Technical Director at Sea Quest, the Director of Engineering at U.S. Divers Co., and the Director of Product Development at Sherwood Scuba.

This registered Professional Electrical Engineer and Professional Control Systems Engineer earned his BS in Mechanical Engineering from the Massachusetts Institute of Technology and his MS in Electrical Engineering from Stanford University. He holds more than 25 US patents and is an active member of the Institute of Electrical and Electronics Engineers as well as the National Fire Protection Association. For a number of years he served as the Chief Engineer at the Tyco Corporation, developing heat tracing technologies. Since 2008, he has operated an independent San Francisco Bay Area consultancy specializing in electrical and mechanical engineering.

This expert in biomechanical engineering has studied typical and perturbed patterns of postural and gait initiation and computational biomechanics of the human finger. She has used her biomechanics acumen to assist in the development of: a shock-resistant mission module support system and energy absorbing and crashworthy seats for helicopters. Her efforts assisted in redefining the recommended lumbar load tolerances for improving the crashworthiness of seating in naval helicopters. She holds a MSc degree in Bioengineering from the University of Illinois at Chicago and a BS in Mechanical Engineering from Northern Arizona University. She is a member of the International Society of Biomechanics, the Association for the Advancement of Automotive Medicine and the Society of Automotive Engineers.

This expert has been in the field of Forensic Engineering for the past 6 years. He earned his BS from California State University of Fresno, and his MS in Mechanical Engineering from Oregon State University. He is a certified Mechanical Engineer, and currently works as an Engineering Consultant at a Forensic Engineering Firm in California.

This highly qualified expert has over thirty years of experience in mechanical engineering with a specialization in failure analysis. He earned his BS in mechanical engineering from University of California, Los Angeles and his MS in mechanical engineering from Stanford University. This expert is a licensed professional mechanical engineer in California and Nevada and has four patents. He remains current in his field as a member of the American Society of Mechanical Engineers and the Society of Automotive Engineers as well as the author of over fifteen articles. He formerly served as the managing engineer for Exponent, Inc. and as the founder and owner of Principia Engineering Services. He is now the founder of an engineering failure analysis consultancy.

This highly qualified engineering expert has extensive experience in his field. For the past 30 years, he has had specific experience in the mining and metal industry, pipeline engineering, and oil hydrocracking, to name a few. He received his BS in aeronautical engineering from the University of London and his MS in materials engineering from American University in Cairo, Egypt. This expert currently has 9 established patents. He has published over 20 journal articles and one book. Formerly, he has held roles as a senior mechanical engineer at Warman Pumps and Bateman Engineering. Additionally, this expert has served as a consultant for Sulzer Pumps North America, and as a former principal engineer and technical director at Fluor. Currently, this expert is a self-employed engineering consultant serving top clients across various industries.

This highly qualified expert in biomechanics has over 20 years of professional experience in areas such as use of force, bulletproof vests, sports, and many more. She received her BS in nursing from Nazareth College, her MS in bioengineering from the University of Michigan and her MS in mechanical engineering from Wayne State University. This expert then went on to complete her PhD in biomedical engineering from Wayne State University. She is a member of various professional organizations, including the American Institute for Medical and Biological Engineering, the American Society of Mechanical Engineering, and the American Society of Engineering Education. She has published over 30 journal articles, three books, and has given nearly 60 presentations on topics in biomechanical and biomedical engineering. Formerly, she has held roles as an associate professor and full-time faculty member in biomedical engineering at Wayne State University. Additionally, she was a television producer for ESPN. Currently, this expert serves as a professor of biomechanics at a prominent CA medical school.

This highly qualified expert has over 15 years of experience in the field of bioengineering. He earned his BS in electrical engineering, two MS degrees - one in mechanical engineering and the other in electrical engineering - and his PhD in bioengineering from Georgia Institute of Technology. He is certified in deep learning with MATLAB and as a Level 1 chartered market technician and DTR international securities exchange trader. He is active in his field as a member of the IEEE Signal Processing Society, the IEEE Communications Society, and the Biomedical Engineering Society. He is also highly involved in research, having received multiple grants for his research and authored numerous publications. This expert currently holds 21 patents. He has held a number of distinguished positions throughout his career serving as the chief technology officer for 4-D Imaging, the chief risk officer of Carlyle Blue Wave Partners, and the chief science officer of Heart in Your Hand LLC and Endovantage LLC. Currently, this expert serves as an associate professor of engineering at a well-known university in Arizona, an associate professor of radiology at a medical university in Arizona, and the lead of camera software for a leading technology company.

This product design and liability expert has over 50 years of experience in mechanical engineering. He has devoted his entire career to the design, development, and commercialization of medical devices and similar consumer products, developing 5 patents along the way. He received his BS in mechanical engineering from California State Polytechnic College before obtaining his MBA from California State College. Formerly, he served as an engineer and department manager at California Injection Molding Co., a senior project engineer and the manufacturing engineer manager at McGaw Laboratories, the director of engineering at Hudson Oxygen Therapy Sales Co., and the president at Fallbrook Engineering Inc. Currently, he serves as the president of a consulting engineering services firm in Washington.

This expert has nearly two decades of sales experience in the renewable energy space. He earned his BS in mechanical engineering from the University of Washington and his MBA from Willamette University. He holds several certifications from professional development, including LEAN Six Sigma, strategic selling, and contract law certifications. He previously served as the chief operating officer of US Digital, the vice president of sales and marketing for Evergreen International, and as the CEO of SunModo Corporation. During his time at SunModo, this expert was responsible for the overall operations of the company as they related to sales, marketing, supply chain diversity, and industry growth. This expert is currently the president of a development consultancy in Washington.

This highly qualified expert has nearly 60 years of experience as a chemical and mechanical engineer. He has demonstrated experience in a number of areas including: speciality and industrial chemicals, petrochemicals, polymers, fertilizers, phosphoric and sulfuric acid, phosphate, mineral processing, dyestuffs and intermediates, coal and coal chemicals, industrial wastewater treatment, cryogenics, gas liquefaction, refinery units, boilers, utilities, cryogenics, sulfur plants, engineered materials, building materials, food processing, animal feed, pipelines, and marine terminals. This earned his BS in chemical engineering from Cairo University, is a fellow of the Institute for the Advancement Of Engineering, and has 3 patents published through the United States, as well as 6 additional patents pending. This expert began his career as a chemical engineer at Chemicoke before going on to serve as a construction engineer at Engineering General Company, a development engineer and industrial chemist at Wunderlich Limited, a chemical engineer at The Austin Company, the chief mechanical engineer at McDonald Engineering Construction Group, a process projects engineer at Superior Air Products, a project engineer at Ralph Parsons, and both a proposal manager and project manager at Occidental Petroleum Corporation. For the past 37 years, this expert has served as the chief engineer at an independent engineering firm in California.