Engine Expert Witnesses in Tennessee

This expert is a registered professional mechanical engineer with extensive hands-on experience in thermodynamics and testing. He earned his Masters and PhD in Mechanical Engineering from Georgia Institute of Technology. He has held a number of engineering positions and is currently a Professor of Mechanical Engineering focusing on thermodynamics at a technical university in the Atlanta area. Primary activities have focused on basic and applied research in the areas of constitutive model development and processing, mechanical property characterization, and structural testing & analysis for advanced materials including high performance and ultra-lightweight polymers, polymeric composites, and metals. Specifically, areas of expertise include formulating new constitutive relationships and associated experimentally-based methodologies for characterizing the time, rate, environmental, and temperature dependent mechanical response of materials; the development of laboratory testing techniques and instrumentation for investigating and determining structural and material behavior, low velocity impact effects, and related phenomenological events in composites; and the development of analytical and numerical methods for characterizing and modeling the environmental degradation, long-term durability, and damage tolerance of polymer matrix composites and MEMS structures. Current topics include experimental mechanics, MEMS, structural analysis and design, rheology, thermochemical analysis, fatigue life assessment and prediction, micromechanics and long term durability.

Please see full CV

This highly qualified expert has served as a senior operations executive for regional and international airports. He is an Accredited Airport Executive by the American Association of Airport Executives, as well as a Certified Airport Security Coordinator, a Certified Private Pilot, and certified by the FAA in Airport Planning & Capacity. He earned his B.S. in Aeronautical Studies and Airport Management from Embry Riddle Aeronautical University and his Master of Public Administration in Organizational Management from Golden Gate University, and then proceeded to hold positions with Sky Harbor International Airport, Tampa International Airport, and Gainesville Regional Airport. More recently, the expert was the Director of Operations for Birmingham International Airport, the Deputy Airport Director for Raleigh-Durham International Airport, and the Vice President of Operations at Doha and Hamad International Airports in Qatar. He is now an airport operations consultant specializing in operational concepts and new Terminal Readiness for airports/airlines and aviation planning/design firms.

This highly qualified mechanical engineer earned his BS in Mechanical Engineering from City College of New York, his MS in Mechanical Engineering from Rensselaer Polytechnic Institute, and his PhD from the University of Connecticut. He has been formally trained in a number of engineering disciplines, including accident investigation and labels/warnings/failure to warn instructions. He belongs to a number of highly prestigious societies in the engineering field, including the International Code Committee and the American Society of Safety Engineers. Additionally, he possesses in-depth knowledge to reach the root cause of a wide range of accidents and failures in the following areas: turbines, human performance, operator training, man-machine interface, material science, structures, statics, dynamics, pneumatics, hydraulics, lubrication, fire protection sprinkler systems, elevators, cranes, hoists, escalators, aerial platforms, fork lifts, warning labels and instructions, failure to warn, OSHA standards and requirements, heat transfer and thermodynamics. This expert currently serves as an engineering consultant.

This qualified expert has over fifty years of experience in all aspects of the automotive industry. He received his AS in Business and Accounting from Mesa Community College and has completed further training in: the Ford Motor Company Night Course at Phoenix Union Technology, Automobile/ Automotive Mechanics Technology from Lincoln Technical Institute, Computer Vehicles and Fuel Injection from Rangs Training Center, Vision Training and AMI Management from the Automotive Service Association, and Transmissions from the Automatic Transmission Builders and Automatic Transmission Service Group. He is an ASE Certified Master Technician with L1 Advance Engine Performance, and has published an article in Transmission Digest about diagnosing shifting issues. Formerly, he was an owner technician at Auto Masters, the Lead Technician at Ark Automotive, and a diagnostician at Certified Transmission Independence. Currently, he is an instructor at a large automotive training company.

This highly qualified expert has over 25 years of experience in the chemical and petrochemical industries. He earned his B.S., M.S., and Ph.D. in Chemical Engineering from Brigham Young University. The expert has worked in academic roles throughout his career, including adjunct professor roles at the University of Michigan and the University of Utah. He has also been very active in industrial positions and held research roles with Dow Chemical Company and John Zink Company, among others. The expert has published 45+ papers, has authored 5+ book chapters, and holds 8 patents. He is an active industry consultant and currently serves as a Professor of Chemical & Nuclear Engineering for a university in Missouri.

This well credentialed expert earned his B.S. in Mechanical Engineering from George Washington University, his M.S. in Mechanical Engineering from Virginia Tech, and his Ph.D. in Mechanical Engineering from George Washington University. He has held academic positions at various levels dating back to the 1980s and currently serves as a Professor of Mechanical Engineering and the Department Head for a leading public research university in Virginia. His areas of engineering expertise include mechanical engineering, control systems, dynamics, robotics, intelligent vehicles, and transportation safety. He focuses his efforts on several application areas, including automotive safety systems, vehicle dynamics and control, collision warning/avoidance, and autonomous vehicles. The expert has co-authored 2 books and 7 book chapters, as well as numerous other publications (over 160), and he has received 1 patent.

This expert earned his BS in mechanical engineering from the University of Texas at Austin and his MS in product design engineering from Stanford University. He has seven years of industry experience working as a product designer for Ford Motor Company and Volkswagon of America. He has over fifteen years of experience designing products for automotive and home electronics clients. This expert is currently a professor of industrial design at a university in Georgia and the principal of a design and engineering consultancy.

This highly qualified expert has 15 years of experience as an engineer in the accident reconstruction field. He earned both his BS and MS in mechanical engineering from North Carolina State University, graduating as valedictorian of both programs. He actively participates in professional development to stay up to date on the latest technology in his field. This expert is a licensed professional engineer in North Carolina and Oklahoma and is a certified FAA remote pilot. He is active in his field as a member of the Society of Automotive Engineers and currently holds two patents. He is also involved in research, having authored several publications. He has formerly served as an engineering technician for Accident Research Specialists and a guest lecturer of engineering dynamics at North Carolina State University. Currently, this expert serves as a consulting engineer for an accident reconstruction consulting company in North Carolina.

This expert has extensive experience in naval security and the international and domestic defense industry. He earned his BS in mechanical engineering from the US Naval Academy. During his 37-year career with the Navy, he served as a senior naval officer, as a director of warfare requirements, and as a military commander for the Iceland Defense Force. This expert then went on to serve as the corporate direction of naval aviation programs at Lockheed Martin and as the director of business development at Raytheon. Currently, this expert serves as the president of an independent defense industry consultancy in Virginia.

This highly qualified expert has over 30 years of experience as an engineer. He received a B.S. in Mechanical Engineering from the Georgia Institute of Technology and is a Registered Professional Engineer in 9 states. A member of both the American Society of Mechanical Engineers and the National Academy of Forensic Engineers, he has published several articles on various issues including cranes and plumbing failures. He previously worked for Georgia Power Company where he maintained different plant aspects and addressed deficiencies. He also worked at Cerny & Ivey Engineers, Inc. where he managed the engineering and technical staff as well as mechanical/electrical/structural engineering and testing responsibilities. He currently serves as President and Principal Engineer for an engineering company that consults in failure investigations, safety, design, and products and materials testing.

This expert is a nationally renown expert in automotive engineering and currently is Professor of Mechanical Engineering at a top ten automotive design and engineering school, where he also holds the position of Director of Center for Vehicle Systems and Safety and the Railway Technologies Laboratory. This expert is the founding director of the Virginia Institute for Performance Engineering and Research and the Advanced Vehicle Dynamics Laboratory. He has authored more than 200 technical publications, and has made more than one hundred technical presentations in topics related to advanced technologies for ground vehicles. He holds seven U.S. and international patents, and has edited three technical volumes. He is currently Associate Editor of AIAA Journal and the journal of Shock Vibration, and has served as Associate Editor for ASME Journal of Vibration and Acoustics. This expert is a Fellow of American Society of Mechanical Engineers and a member of the Society for Automotive Engineers. He earned his PhD in Mechanical Engineering at State University of New York at Buffalo.