Engine Expert Witnesses in Delaware

With over 30 years of automotive engineering experience, this expert has dedicated his career to the field of accident reconstruction. Holding Masters and Doctoral degrees in automotive mechanical engineering and highway safety, he is a recognized expert whose clients have included U.S., State and Foreign Governments. He has extensive court experience, having been deposed and testified in approximately 200 trials, while he has acted as an automotive engineering consultant in more than 3,000 vehicle crash cases.

This expert has over 40 years of experience as a mechanical engineer. In addition to contributing to over 200 presentations in 38 countries, he has been extensively published in his field and is an established expert in forensic mechanical engineering. His expertise includes accident investigation and medical device liability. He now serves as a Senior Forensic Consultant for a biomechanics and biomedical engineering consulting firm.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This expert is an independent safety consultant out of the UK. For the past 27 years, he has worked in a variety of engineering environments to ensure that UK/EU safety standards were upheld. He is familiar with the UK factory safety standards and product safe design standards and has the appropriate experience to help with this case. He has worked large engineering companies to ensure their compliance with the Health and Safety at Work Act, CE Marking Directives and PUWER.

This expert has over 40 years of experience as a mechanical engineer. His research in tribology, machining of advanced materials, medical device design, dental materials, and high temperature coatings is widely recognized in the scientific and engineering communities. He has published over two hundred fifty papers and reports related to machining of ceramics, mechanisms and mechanics of interfaces, wear and friction, boundary lubrication, and biotribology; and has given more than three hundred lectures on these subjects. He has served as President and CEO for a heart pump developer, a subsidiary for a product company where he served as Vice President of Biotechnology.

This highly qualified expert holds both a Bachelors and a Masters degree in Mechanical Engineering from the University of South Carolina where he was summa cum laude. He is a Certified Plant Engineer and a Certified Training Instructor for Aerial Work Platforms and Rough-Terrain Forklifts. He was enlisted in the United States Navy for 12 years where he was responsible for operating, repairing, and managing nuclear power plants and personnel. He has also served as Director of Engineering, Chief Engineer and has also held the position of Senior Design engineer responsible for manufacturing and new product development. Through his work experiences, he gained an extensive background in welding and fabrication of products and he manages his current company's product testing lab, specifically treestands and associated equipment. He is a member of the National Society of Professional Engineers, American Society of Mechanical Engineers, American Society of Civil Engineers and a Certified Fire Protection Specialist. He has also earned numerous Navy and Marine Corps medals.

This expert earned his PhD in mechanical engineering/aeronautical sciences from the University of California Berkeley and has authored numerous publications in the mechanical engineering and biomedical engineering space. He is a member of the Society of Automotive Engineers and has held numerous professorships relating to multiple facets of engineering. He is the former co-director of the DOT program for motor vehicle trauma at the UCLA schools of engineering and medicine. Currently, this expert is a senior forensic consultant focusing on biomechanics and biomedical engineering.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.

From 2004 to 2012, this expert dedicated his career to the development of lighting controls and motorized window shades and blinds. Having earned a Bachelor's degree in mechanical engineering from Lafayette College, he holds 8 US patents for the design of mechanized light control systems. His career has been centered around new product development. He has experience across several additional industries, including, surgical implants and instruments, mechanical piping, and industrial hose products, both as an engineer and product development team leader.

This biomedical and biomechanical expert spent over 15 years as a Professor at Johns Hopkins University and over 20 years as a member of their Applied Physics Laboratory. He has worked in biomedical implant analysis and design, materials biomechanics, and laminated composite analysis and design. He earned a B.S and M.S. in Mechanical Engineering from the University of Michigan, as well as a Ph.D. in the same field from Rensselaer Polytechnic Institute. The expert was named a Fellow in the American Society of Mechanical Engineers in 2010 and was selected as the Specialty Chief Editor of the Frontiers online journal Biomechanics in 2013. He has written three book chapters, co-authored 100+ peer-reviewed publications, conference proceedings and presentations, and received 16 patents, including patents involving hip replacements dating back to the 1980s. He currently runs his own consulting firm specializing in composite design and analysis, biomechanics of impact, structural design and analysis, and proposal writing.

This highly qualified expert received his BS in Mechanical engineering, an MS in mechanical engineering and a second in aerospace engineering. His PhD in aerospace engineering was granted by the the University of Michigan. Formerly he served as as a senior fellow at the National Institute of Standards and Technology in their fire research division. Currently he serves as professor and director of undergraduate studies for the department of fire protection at a major MD university. He has over 20 years experience in fire combustion and research.

This highly qualified expert has extensive experience in the field of fire protection engineering. He received his bachelors and masters from the University of San Diego, both in mechanical engineering. His PhD in mechanical engineering was also granted from UCSD. He is on the Board of Directors for the International Association of Wildland Fire as well as the NFPA Technical Committee on Wildlife and Rural Fire Protection. Currently he serves as an associate editor for a fire technology publication and associate professor in the department of Fire Protection Engineering at a major Maryland university.

This highly qualified expert has nearly 40 years of experience in the field of mechanical engineering. He earned his BS in mechanical engineering from Rochester Institute of Technology before earning his MBA from Saint Bonaventure University. This expert is a registered professional engineer and currently holds 2 patents. His former positions include product design manager for Dresser Industries, owner and operator of Advanced Automation Solutions, and director of engineering for Innovative Pressure Technologies. Currently, this expert is a professional engineer for a private mechanical engineering firm in Pennsylvania.

This highly-qualified expert has 30 years of experience in the field of accident reconstruction. His work has included areas such as occupant protection, seating and restraints, seatbelts, airbags, event data recorders, child seats, wheelchair restraints, ambulance transport, and mechanical failure. He earned his BS in mechanical engineering from Drexel University and is a licensed professional engineer in Alabama, Delaware, New Jersey, and Pennsylvania. This expert holds several certifications, including certifications as a child passenger safety technician and instructor, a crash data retrieval technician and data analyst, and a basic vehicle rescue technician. He is active in his field as a member of multiple associations, including the American Society of Mechanical Engineers, SAE International, and the National Academy of Forensic Engineers. He is highly involved in research, having authored numerous publications and as the current holder of two patents. He has formerly served as a mechanical engineer for the Naval Air Warfare Center and senior engineer for both ARCCA Inc. and the Forensic Safety Group. Currently, this expert is a senior mechanical engineer for a private engineering firm in Pennsylvania.

This highly-qualified expert has extensive experience in the field of biomaterials and biomedical engineering. He earned an MS in mechanical engineering at the University of Palermo in Italy, an MS in biomedical engineering from Imperial College London, and his PhD in biomechanics and tissue engineering at the University of Pittsburgh. He also completed a post-doctoral fellowship in tissue engineering, biomechanics, and biomaterials at the University of Palermo. This expert is active in his field as a member of several organizations, including the Tissue Engineering & Regenerative Medicine International Society, the American Society for Mechanical Engineers, and the Society for Biomaterials. He is also highly involved in research, having authored numerous publications and spoken as an invited speaker at multiple conferences throughout his career. He also currently holds 13 patents. He has previously served as an R&D engineer in the biomedical robotics and EMC department at the University Campus Biomedico Rome, a biotechnology and bioengineering consultant for the Italian Ministry for Economic Development and Livanova, a post-doctoral researcher in tissue engineering and biomechanics at the University of Pittsburgh, and a research associate in tissue engineering at the McGowan Institute for Regenerative Medicine at the University of Pittsburgh. Currently, this expert is a research assistant professor of surgery and bioengineering at a distinguished university in Pennsylvania, as well as a biotechnology and bioengineering consultant for a university-affiliated startup.

This highly-qualified laryngology expert has experience with voice and airway disorders, laryngeal and airway trauma, difficult airways, and vocal fold paralysis. She received her BSE in mechanical engineering from the Pratt School of Engineering at Duke University and her MSE in mechanical engineering from the University of Michigan before earning her MD from Wayne State University. She subsequently completed her residency in otolaryngology with a focus in head and neck surgery at Henry Ford Health System and her fellowship in voice and airway surgery at the Cleveland Clinic Foundation. This expert is board-certified in otolaryngology and is active in her field as a member of the American Academy of Otolaryngology-Head and Neck Surgery, the International Association of Phonosurgeons, and the Triological Society. Formerly, she served as a global product development engineer at General Motors Corporation, an assistant professor of immunology & microbiology at Wayne State University School of Medicine, an assistant professor of otolaryngology at Oakland School of Medicine, and a locum tenens otolaryngologist at ProMedica Memorial Hospital. Currently, this expert serves as a staff laryngologist at a health network, as well as an assistant professor of surgery in otolaryngology at a university, both in Pennsylvania.

This expert has over 30 years of experience in the medical device industry, with broad expertise in cardiovascular and endovascular fields with a focus on percutaneous catheters, heart assist devices, brain and aortic aneurysm treatment, and vascular closure products. He earned his MS in mechanical engineering at Moscow State Technical University and worked as the lead engineer at the Scientific Institute for Transplantology and Artificial Organs before moving to the United States. He is a registered patent agent through the US Patent and Trademark Office and is a member of the Association of University Technology Managers, the International Society for Rotary Blood Pumps, and the American Society for Artificial Internal Organs. He formerly served as the scientific director and vice president of technology at Datascope Corp. before he served as the CTO of Cerus Endovascular. This expert is currently the principal of a patent consulting company, the founder of a medical technology development company, and the vice president of product development for a medical device start-up in New Jersey.