NHTSA Expert Witnesses in Pennsylvania

This qualified expert has over 40 years of experience as an automotive powertrain engineer. He received his BS in mechanical engineering from Cornell University and his ME in engine systems from the University of Wisconsin Madison. He is a member of the Society of Automotive Engineers and the American Society of Mechanical Engineers. He was an engineer for McDonnell Douglas Astronautics and ALCO Power. For several years, he worked for Daimler Chrysler as an engine development engineer on their future engine development team and as a product development specialist on their advanced engine task force. He worked as an advanced engineering product specialist for Mahle Technology, where he developed a new piston and cylinder liner technology. He also worked as a technical specialist for the corporate advanced engineering division of BorgWarner. Over the course of his career, this expert has filed for 19 patents and written numerous published papers. For his work, he has won the BorgWarner Innovation Award and the SAE McFarland Award. Currently, this expert serves as a senior consultant for an engine science consulting firm in NY.

With over 30 years of automotive engineering experience, this expert has dedicated his career to the field of accident reconstruction. Holding Masters and Doctoral degrees in automotive mechanical engineering and highway safety, he is a recognized expert whose clients have included U.S., State and Foreign Governments. He has extensive court experience, having been deposed and testified in approximately 200 trials, while he has acted as an automotive engineering consultant in more than 3,000 vehicle crash cases.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This EDR expert is a principal at a vehicular accident reconstruction consultancy. He retired from law enforcement after a twenty-five year career, during which time he investigated over 2500 motor vehicle collisions. Fourteen of those years he served with the Bergen County (NJ) Prosecutor's Office Fatal Accident Investigation Unit. This expert earned a degree in mechanical engineering, summa cum laude, from the New Jersey Institute of Technology and he is ACTAR accredited. He has testified as an expert in depositions and trials. He participates in crash testing with the University of Tulsa Crash Reconstruction Research Consortium and the University of North Florida. This expert teaches advanced accident reconstruction classes and lectures throughout the country at accident reconstruction conferences. He has performed more than 100 EDR downloads.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.

The qualified expert is cross-trained in vessel and vehicle accident reconstruction and in homicide/criminal investigation. He has conducted more than 1,500 investigations of serious and fatal vessel and vehicle accidents, and of crimes against persons and property. He was a board member of New Jersey State Police review boards that evaluated police vehicle accidents and pursuits for compliance with state guidelines and NJSP standard operating procedures. The expert is also a former NJSP Academy Instructior and NJSP human resouces administrator. Currently, the expert is a principal investigator for a private consulting firm specializing in boating and PWC accident investigation and reconstruction, and the investigation and reconstruction of police vehicular pursuits and emergency vehicle accidents. The expert also offers consultation regarding seamanship and captaincy matters and police procedures relating to police patrol matters and police activities at roadway construction sites. The expert also has experience in matters involving commuter bus passengers, school crossing guards and roadway construction zone activities. The expert has been recognized in an NJ area verdict publication regarding investigative work done in a police vehicular pursuit and police procedures matter.

This expert has provided consulting services in accident reconstruction, biomechanics, EDR/ECM data retrieval, forensic vehicle examinations, product safety, system safety, and human factors engineering for over 25 years. He has full accreditation as a Traffic Accident Reconstructionist [ACTAR 738]; is a Certified Professional Ergonomist [N. 017]; is a specialist in using PC Crash computer simulation for the purposes of accident reconstruction; has specialized training and certification in Crash Data Retrieval Systems [both passenger vehicle EDRs and Transport Heavy Truck ECMs]; and is a licensed Commercial Motor Vehicle Operator. He has conducted over 3000 technical accident investigations and reconstructions, and has qualified to testify in courts in both Canada and the U.S. He is currently a Principal Associate for an accredited Accident Investigation and Reconstruction firm, which has offices throughout the northeast: New York, New Jersey, Pennsylvania, Connecticut, and Ontario,Canada.

This expert has designed and improved over 400 machines for the food, pharmaceutical, electronics, mining, consumer goods and automotive industries. He has led major design projects for Fortune 500 Companies, such as Unilever, Coca-Cola, Nestle, Komatsu, Caterpillar, and Hitachi. He earned his Bachelor's and Master's degrees in Mechanical Engineering in Italy, and has gained considerable professional experience in the United States, having recently served as the Chief Engineer for American Conveyor.

This New York City traffic maintenance, street design, accident reconstruction, and building codes expert leverages his civil engineering background in his forensic work. He graduated from the City College of New York with a Bachelor's degree in Civil Engineering and maintains the distinction of Professional Engineer in both New York and New Jersey. A member of the Society of Automotive Engineers, American Society of Civil Engineers and Past President (2006) and Fellow in the National Academy of Forensic Engineers, he has previous experience in the design and rehabilitation of highways in the New York area. He is adept at 2D and 3D computer analysis.