Mechanical Engineering Expert Witnesses in Arizona

This highly qualified expert earned his BS from Hope College and his PhD in organic chemistry from Indiana University. He has experience in catalyst research in support of polyethylene manufacturing, additive stabilization of polymers, interaction of chemicals with plastics, extrusion production of plastic pipe, plastic pipe material technical service and plastic pipe system component testing. End use applications in which he is a plastics expert include corrugated plastic pipe, water distribution and plumbing systems, oil and gas production, plastic gas pipe, and conduit. In addition, this expert is active in his field as a member of numerous societies including The American Society of Mechanical Engineers, American Gas Association, American Petroleum Institute, Plastic Pipe Institute, and Society of Plastics Engineers. Formerly, he held roles as Pipe Applications and Technical Supervisor at Chevron Phillips Chemical Company and Technical Director at Microbac Hauser Divison. Currently, he is President of a plastics consulting firm.

This expert has been in the field of Forensic Engineering for the past 6 years. He earned his BS from California State University of Fresno, and his MS in Mechanical Engineering from Oregon State University. He is a certified Mechanical Engineer, and currently works as an Engineering Consultant at a Forensic Engineering Firm in California.

This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a roller coaster and amusement ride design consultancy firm. He has been involved in the design of numerous roller coasters and other amusement rides. Prior to forming this consultancy, he served as Chief Engineer for S&S Power, one of the largest and most innovative amusement ride manufacturers in the world. He can speak to finite element analysis, dynamic systems analysis, mechanical design, launch systems, coaster train design, restraint design, pneumatics, hydraulics, data acquisition, data analysis, technical project management, specialty computer programming, and testing in the amusement industry.

This expert is a full professor of Mechanical Engineering at a prominent university in the Western US. He received his PhD in Welding and Materials Engineering from The Ohio State University. Prior to joining academia, he worked as a research assistant at Edison Welding Institute and as a materials engineer at Westinghouse-Power Generation. His research interests are in the area of materials joining, materials characterization, and the relationships between microstructure and mechanical properties.

This highly qualified expert has over thirty years of experience in mechanical engineering with a specialization in failure analysis. He earned his BS in mechanical engineering from University of California, Los Angeles and his MS in mechanical engineering from Stanford University. This expert is a licensed professional mechanical engineer in California and Nevada and has four patents. He remains current in his field as a member of the American Society of Mechanical Engineers and the Society of Automotive Engineers as well as the author of over fifteen articles. He formerly served as the managing engineer for Exponent, Inc. and as the founder and owner of Principia Engineering Services. He is now the founder of an engineering failure analysis consultancy.

This expert has extensive experience in the amusement ride industry. He earned his BS in mechanical and aerospace engineering from Utah State University. He is a licensed structural engineer and professional engineer. He was the engineer of record for two notable commercial amusement rides and has experience in material handling and structural design. Currently, he is the president of an engineering design company that designs amusement park rides.

This expert has 40 years of experience as a mechanical engineer. His work has focused on heat transfer, cryogenics, high vacuum, structural and thermal analysis, thermodynamics, vibration analysis, safety, electromagnetics, explosives, printed circuit boards (PCBs), and fluid flow. He obtained his BS in mechanical engineering at San Diego State University and earned a graduate certificate in systems engineering from the Air Force Institute of Technology. He actively participates in professional development to stay up to date on the latest practices in his field. This expert is a registered professional engineer in New Mexico and is active in his field as a member of the American Society of Mechanical Engineers. He has formerly served as a test conductor for Martin Marietta, lead design engineer for Beech Aircraft/Ball Aerospace, and an engineer for Cryogenic Companies, JAYCOR, and UTC/Goodrich. Currently, this expert is an engineer for a missiles manufacturer in New Mexico.

This highly-qualified expert has extensive experience in industrial and recreational fall protection, as well as the design and manufacturing of personal protective equipment for recreational activities such as rock climbing and mountaineering. He earned his BS in mechanical engineering from Widener University and is certified as a climbing wall instructor program provider and a high angle and confined space rescue technician. He is also Level III with the Society of Professional Rope Access Technicians. This expert is active in his field as a member of the Climbing Wall Association, the American National Standards Institute's Fall Protection Committee, and the American Mountain Guides Association. He has formerly served as a mechanical engineer for the Naval Surface Warfare Center, the senior research engineer for the Harold K. Dunn M.D. Orthopaedic Research Laboratory, and the technical director for Petzl America. Currently, this expert is the vice president of quality for a major mountain sports and climbing equipment manufacturer based in Utah.

This highly qualified expert has nearly 60 years of experience as a chemical and mechanical engineer. He has demonstrated experience in a number of areas including: speciality and industrial chemicals, petrochemicals, polymers, fertilizers, phosphoric and sulfuric acid, phosphate, mineral processing, dyestuffs and intermediates, coal and coal chemicals, industrial wastewater treatment, cryogenics, gas liquefaction, refinery units, boilers, utilities, cryogenics, sulfur plants, engineered materials, building materials, food processing, animal feed, pipelines, and marine terminals. This earned his BS in chemical engineering from Cairo University, is a fellow of the Institute for the Advancement Of Engineering, and has 3 patents published through the United States, as well as 6 additional patents pending. This expert began his career as a chemical engineer at Chemicoke before going on to serve as a construction engineer at Engineering General Company, a development engineer and industrial chemist at Wunderlich Limited, a chemical engineer at The Austin Company, the chief mechanical engineer at McDonald Engineering Construction Group, a process projects engineer at Superior Air Products, a project engineer at Ralph Parsons, and both a proposal manager and project manager at Occidental Petroleum Corporation. For the past 37 years, this expert has served as the chief engineer at an independent engineering firm in California.

This highly-qualified engineering expert has over three decades of experience in his field. He earned a BS in civil engineering from National Technology University. He went on to earn an MS in civil engineering, an MS in aeronautics and astronautics, and a PhD in mechanical engineering from the Massachusetts Institute of Technology. He is active is in field as the author of numerous engineering publications and the founder and director of several engineering laboratories focusing on surface mechanics. Formerly, he served as a professor of mechanical and industrial engineering at the University of Illinois Urbana-Champaign. Currently, this expert is a principal investigator at a technological research institute, a faculty materials scientist at a DOE-affiliated research laboratory, and a professor of mechanical engineering at a distinguished university in California.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This accident reconstruction expert earned a masters degree in kinesiology from California State University Northridge and a PhD in Biomedical Engineering from UCLA. He is a certified traffic reconstructionist and specializes in accident reconstruction and biomechanics for transportation related accidents (trains, subways, motor vehicles, buses, etc). He belongs to numerous prestigious societies in his field, including the National Association of Traffic Accident Reconstructions, National Association of Railroad Safety Consultants and Investigators and the International Society of Biomechanics. He is currently the President of an Accident Reconstruction & Biomechanics firm.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This registered Professional Electrical Engineer and Professional Control Systems Engineer earned his BS in Mechanical Engineering from the Massachusetts Institute of Technology and his MS in Electrical Engineering from Stanford University. He holds more than 25 US patents and is an active member of the Institute of Electrical and Electronics Engineers as well as the National Fire Protection Association. For a number of years he served as the Chief Engineer at the Tyco Corporation, developing heat tracing technologies. Since 2008, he has operated an independent San Francisco Bay Area consultancy specializing in electrical and mechanical engineering.