Forensic Engineering Expert Witnesses in Arizona

This expert earned his BS in structural engineering at the University of Science and Technology in Iran and his MS in structural engineering from the University of British Columbia. This expert holds structural engineering licenses in California, Washington, Hawaii, Arizona, and Nevada and professional engineering licenses in California and Washington. He is active in his field as a member of several professional organizations including the Structural Engineers Association of California. He has worked as a subject matter expert for structural engineering exams for the California Board of Professional Engineers and Land Surveyors, the director of the Structural Engineers Association of Southern California and a lecturer of engineering for several structural engineering programs throughout California. For the past 34 years, he has served as the managing director at a structural engineering consulting firm in California.

This highly qualified expert has nearly 60 years of experience as a chemical and mechanical engineer. He has demonstrated experience in a number of areas including: speciality and industrial chemicals, petrochemicals, polymers, fertilizers, phosphoric and sulfuric acid, phosphate, mineral processing, dyestuffs and intermediates, coal and coal chemicals, industrial wastewater treatment, cryogenics, gas liquefaction, refinery units, boilers, utilities, cryogenics, sulfur plants, engineered materials, building materials, food processing, animal feed, pipelines, and marine terminals. This earned his BS in chemical engineering from Cairo University, is a fellow of the Institute for the Advancement Of Engineering, and has 3 patents published through the United States, as well as 6 additional patents pending. This expert began his career as a chemical engineer at Chemicoke before going on to serve as a construction engineer at Engineering General Company, a development engineer and industrial chemist at Wunderlich Limited, a chemical engineer at The Austin Company, the chief mechanical engineer at McDonald Engineering Construction Group, a process projects engineer at Superior Air Products, a project engineer at Ralph Parsons, and both a proposal manager and project manager at Occidental Petroleum Corporation. For the past 37 years, this expert has served as the chief engineer at an independent engineering firm in California.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This highly qualified expert has 17 years of experience with in-depth Accident Reconstruction analysis. Her specialties include Motor Vehicle Accident Reconstruction for product liability matters. She is experienced collecting and analyzing Event Data Recorders and is currently an Expert at a distinguished Forensic Engineering and Accident Reconstruction firm.

This expert has been in the field of Forensic Engineering for the past 6 years. He earned his BS from California State University of Fresno, and his MS in Mechanical Engineering from Oregon State University. He is a certified Mechanical Engineer, and currently works as an Engineering Consultant at a Forensic Engineering Firm in California.

This expert has more than 23 years of experience in the battery industry. He earned his undergraduate degree in Chemistry from Johns Hopkins University and earned his graduate degree and doctorate from the University of Colorado, where his scholastic work focused on analytical chemistry and electrochemistry. At Optima Batteries a manufacturer of high power, spiral wound lead-acid batteries, he participated in many R&D projects, including one sponsored by GM and the Department of Energy to develop a hybrid electric vehicle. At TDA, he worked to apply activated carbon technologies to a variety energy storage concepts including: ultracapacitors, ultracapcitor hybrids, lithium sulfur batteries, hybrid carbon monofluoride batteries and silicon anodes for lithium-ion batteries. This expert has particular expertise in lead-acid batteries and lithium-ion batteries. He currently operates a lab in Boulder, CO where he can do more detailed investigations. These might include: forensic exams (evaluation of evidence), failure analysis, performance analysis and modeling.

This highly qualified expert has over thirty years of experience in mechanical engineering with a specialization in failure analysis. He earned his BS in mechanical engineering from University of California, Los Angeles and his MS in mechanical engineering from Stanford University. This expert is a licensed professional mechanical engineer in California and Nevada and has four patents. He remains current in his field as a member of the American Society of Mechanical Engineers and the Society of Automotive Engineers as well as the author of over fifteen articles. He formerly served as the managing engineer for Exponent, Inc. and as the founder and owner of Principia Engineering Services. He is now the founder of an engineering failure analysis consultancy.

This highly qualified expert has over 40 years of experience in metallurgy and metallurgical failure analysis, with expertise in metallurgical engineering, failure analysis, materials solutions, welding and corrosion consulting in stainless steel, aluminum alloys, copper-based alloys, titanium alloys, nickel-based alloys, and high alloys. He earned his BS in metallurgical engineering from California Polytechnic State University. This expert is a registered professional engineer in metallurgy and is active in the field as a member of the American Welding Society, the American Society of Mechanical Engineers, and the American Society for Metals. He has previously held a Level II certification in radiographic and ultrasonic testing and a Level III certification in magnetic particle, liquid penetrant, and visual testing through the American Society for Nondestructive Testing. This expert has previously served as a hydraulics mechanic for USMC Aircraft, a sheet metal mechanic for Rohr Corporation, plant metallurgist for United Centrifugal Pumps, and staff metallurgist for Sunstrand. He also worked on the Lockheed MSD engineering co-op program and EG&G Services nuclear plant construction. For 35 years, this expert has served as the owner and consulting engineer for a private metallurgy and engineering consultancy in California.

This highly qualified expert has 50 years of experience in the field of engineering. He earned his BS in electrical engineering from Rutgers University and has completed a multitude of professional development courses and seminars over the course of his career. This expert is a licensed professional engineer in 5 states and is a certified diver. He is active in his field as a member of numerous organizations, including the National Society of Professional Engineers, the International Association of Forensic Sciences, and the Institute of Electrical and Electronic Engineers. He has also previously served as the president of the National Academy of Forensic Engineers. This expert has previously served as a field service engineer for Westinghouse Electric Corporation, electrical project manager for American Biltrite, senior electrical design engineer for Air Products and Chemicals, and consulting engineer for Paul Zamrowski Associates. Currently, he serves as a consulting electrical engineer for an independent engineering consultancy, with experience investigating the causes of electrical malfunctions, failures, or injury in cases of fires, lightning strikes and power surges, electrical shocks and electrocution, shipping damage, and accident reconstruction.