Supply Chain Management Expert Witnesses in Nevada

This expert is an established specialist on marketing and global supply chain practices within global impact areas, including the fast moving consumer goods and IT industry. He has held a number of executive and senior management roles, including appointments at Proctor & Gamble and TELUS Communications, Inc. He earned his BS in computer science from the University of Windsor, his MBA from Wayne State University, and a PhD in supply chain management from the University of Capetown. He currently serves as an adjunct professor of supply chain management at an Ivy League University and a prominent California university. In addition to his faculty commitments, he has spoken at a TEDx event, OPAL and UN, and consults on a number of supply chain projects globally.

This health and safety professional has more than three decades of experience in industrial hygiene, occupational exposures, safety, and public health. Throughout his career, this expert has personally conducted over a thousand industrial hygiene evaluations for numerous companies in various fields including engineering, mining, manufacturing, oil & gas, healthcare, environmental, pharmaceutical, biotechnology, food processing, agriculture, and construction. As a Certified Industrial Hygienist and Certified OSHA HAZWOPER, he evaluates, develops, and oversees health & safety programs and plans, conducts hazard/risk assessments and ergonomics surveys, and assesses work practices, engineering controls, and personal protective equipment. He currently serves as a Partner and Principal Industrial Hygienist for California-based occupational and environmental health & safety consultancy.

This highly-qualified expert has decades of experience in supply chain management and buying in the commercial aircraft industry. He earned his BS in communications and business from Arizona State University and earned certifications in purchasing principles of management and as a jet engine technician. Formerly, he served as a jet engine technician for the United States Air Force, as a buyer and jet engine technician at Garrett Airesearch, and as a subcontract manager and senior buyer at The Boeing Company as well as a procurement manager at Insitu, Inc, a subsidiary of The Boeing Company.

This highly qualified expert has nearly 35 years of experience in safety products distribution. He received his BSME from the University of Delaware before earning his MBA in finance and strategic planning from Gannon University. This expert specializes in supply chain management for safety products, including product development of electronics, aircraft and aerospace parts, industrial controls, motors, power tools appliances, and sprinklers. He has formerly served as the manager of production engineering and speed variator products operation at General Electric, the plant manager of the US housewares division of Black & Decker, and director of manufacturing planning and vice president of operations for both outdoor manufacturing and the household division of Sunbeam Corporation. Currently, this expert serves as the CEO and founder of a private consulting company based in California.

This expert in mattress and sleep product manufacturing has more than 30 years of experience in the field. He earned his BA in political science from Williams College and has completed courses through the MBA program at Babson College and the Harvard University Extension Program. He has served in executive roles for multiple sleep product manufacturers, including as president at Serta, as chairman of the Board at Englander Sleep Products, and as the founder and president of World Sleep Products. He currently serves as a business consultant for numerous US companies.

This highly-qualified expert has extensive experience in industrial and recreational fall protection, as well as the design and manufacturing of personal protective equipment for recreational activities such as rock climbing and mountaineering. He earned his BS in mechanical engineering from Widener University and is certified as a climbing wall instructor program provider and a high angle and confined space rescue technician. He is also Level III with the Society of Professional Rope Access Technicians. This expert is active in his field as a member of the Climbing Wall Association, the American National Standards Institute's Fall Protection Committee, and the American Mountain Guides Association. He has formerly served as a mechanical engineer for the Naval Surface Warfare Center, the senior research engineer for the Harold K. Dunn M.D. Orthopaedic Research Laboratory, and the technical director for Petzl America. Currently, this expert is the vice president of quality for a major mountain sports and climbing equipment manufacturer based in Utah.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This highly qualified expert has over 35 years of experience in providing safety training for forklift use. Certified as a Forklift Instructor by the National Safety Council and as an OSHA Authorized General Industry Trainer, his expertise includes various warehouse systems and industrial truck classes 1-7 including electric forklifts, pallet jacks, and tug tractors. He has authored two publications on lift truck and forklift safety training. He also created computer-based operator training programs for forklift use at large companies. His previous positions include sales and training instruction for various companies including Raymond Handling Concepts Corp. and Exide Corp. He currently works as President of a forklift safety consulting firm.

This expert is a partner in a large independent public accounting firm, where he serves as the leader of the firm's National Retail/Consumer Products industry group. He provides consulting services in the apparel, manufacturing, distribution, and retail industries.

This expert is a multi-disciplined inventor with dozens of patents and applications, and a seasoned business creator with 23 years of experience in various areas of Automotive Electronics, Consumer Electronics, and Electronic Product Design. In 1991, he established a design, manufacturing and distribution facility for his dozens of inventions. He is currently a consultant working primarily in the litigation context of electronics.

This expert has extensive work experience in the healthcare supply chain and hospital procurement fields. He began his career as the Assistant Director of Purchasing at a Michigan medical center, and then served for nearly a decade as a Purchasing Agent for a South Carolina hospital system. Later on, he served as the Director of Capital Equipment Services at Aurora Health Care, VP of Logistics at Amita Health, the Director of Procurement at Avera Health, and the Chief Procurement Officer at Florida Blue. A member of the Association for Healthcare Resource and Materials Management, he is designated by the Institute for Supply Management as a Certified Purchasing Manager. He earned his BBA from Northwood University in Michigan and is pursuing an MBA, with a focus on Health Care Administration, at Benedictine University. He actively practices in the field, serving as the Director of Materials Management at a Utah hospital and advising a Colorado health alliance.

A business savvy recycling company owner who has a diverse range of business skills such as in manufacturing as an Inventory and Production Control Planner and as a scrapyard and recycling center manager. He has had vast experience with California's CRV laws on bottles as well, as he has dealt with those laws in a professional setting.

This expert has 26+ years of experience in the dental supply industry. He began his career as a Purchaser for SmartHealth and held this role from 1991 until 1998. After three years as a Territory Manager for Dentsply, the expert joined Patternson Dental as an Equipment Specialist & Office Designer. In this position, he was responsible for assisting practice owners in finding the proper equipment and technology for their practice. He also provided 3-D renderings of potential office plans and acted as a liaison between the practice owner and contractors, architects, and interior designers. He was with Patterson from 2003 until mid-2016, when his position was eliminated as part of a massive restructuring. He now works at another dental equipment supply company.

This expert has extensive experience in dealing with and managing Chinese manufacturing of all kinds as a global chain strategist and architect. On top of the manufacturing process, she has also dealt with quality control of Chinese manufactured products. She has dealt with several Chinese liability cases.

This expert has over 20 years of expertise in materials consulting and forensic engineering work. He received a bachelor's in manufacturing engineering from Brunel University of West London. He continued on at Brunel to earn his PhD in metallurgy. A licensed metallurgical engineer, he is a member of the American Society of Testing & Materials and the American Society of Materials International. He served as a senior metallurgical engineer at Testing Engineers INC. and a materials engineer for the RJ Lee Group. Currently he works as a senior metallurgical engineer.

This highly qualified expert is a registered professional engineer with over 15 years of experience in geotechnical and structural design in roles spanning from engineering consulting to senior executive in a manufacturing company. He received a diploma in civil engineering with an emphasis on structural engineering from Germany and a Ph.D. in civil engineering with an emphasis on geotechnical engineering from The University of Arizona. He holds professional engineering licenses in 35 U.S. states as well as the country of Australia and serves or has served on various national and international committees related to solar energy system design and construction. He is also a frequent speaker at conferences throughout the United States and Canada.