Safety Expert Witnesses in Virginia

This qualified expert has more than 20 years of experience in safety compliance with more than 10 years in managing supermarket and retail location safety. He previously worked at Winn-Dixie Stores as a District Manager and Division Safety Director. He holds several certifications from various associations including the National Association of Safety Professionals and the National Safety Council in Principles of Occupational Safety & Health. He was also formerly acted as Corporate Safety Director for Piedmont Service Group. He currently works as President of a retail safety, compliance, and indoor air quality consulting firm.

This seasoned expert is the primary consultant and CEO of an ATV Safety Consulting company. From 1985 to 1989 he was licensed as an ATV Rider Training Instructor. In 1989 he was elevated to position of Chief Instructor for the ATV industry. He has held that position from 1989 to the present. In 2011, he became Chief Driver Coach Trainer for the ROV industry. He has assisted in managing and establishing the current curriculum for the Nation's leading ATV rider training organization and the leading ROV training organization. The ATV organization has provide ATV rider education to more than 750,000 ATV users. He was selected by the Consumer Product Safety Commission (CPSC) to not only testify on several ATV safety issues, but to also train their compliance officers in hands-on ATV operation. From 1970 to 1993 he was employed as a State Trooper for the Maryland State Police. Consequently he adds twenty-three years of expertise in accident investigation to his curriculum vitae. He has testified in Court concerning ATV, ROV and UTV accident cases extensively.

This human factors psychologist has nearly 30 years of experience as a safety analysis professional. She began her career as a Human Factors Psychologist with the U.S. Consumer Product Safety Commission (CPSC), and she currently owns and operates a firm that examines the design, instructions and warnings of consumer products. She conducts training for manufacturers on issues such as anticipating product hazards, consumer behavior, motivation & perceptions, foreseeable interactions with consumer products, etc. She earned her B.A. from George Washington University and her Master's/Ph.D. in Industrial/Organizational Psychology from the same institution. Her career has specialized in the safety of products regulated by the CPSC and the Food and Drug Administration. She is the recipient of numerous professional awards including the A.R. Lauer Safety Award from the Human Factors and Ergonomics Society, and the Chairman's Commendation Award from CPSC.

This highly qualified expert has 20+ years of safety administration and leadership experience. He earned his BS in Organizational Leadership from Wright State University and his MS in Occupational Safety and Health from Columbia Southern University. He is OSHA certified as an Occupational Safety & Health Manager and Health Professional and he belongs to the American Society of Safety Engineers. His expertise includes rollout safety policies and procedures, prevent or correct unsafe working conditions, design work areas & policy procedures, address hazard and compliance issues, and develop and benchmark safety standards program. He formerly served as Safety Leader in the gardening department at Home depot.

This expert has decades of experience in pre-clinical through Phase IV research. Apart from standard statistical methods, he has special expertise in adaptive methods, recurrent event methods, experimental design, assays, mathematical modeling and simulation, data-mining and super-computer applications. As an independent statistician he serves on numerous data and safety monitoring boards and regularly interacts with FDA and EMA personnel on behalf of his clients. With more than 80 publications, book chapters, and presentations in the field of biostatistics, he is a consummate expert in the field who shares his expertise as an adjunct professor of biostatistics at a major southeastern university. Formerly, he served as a lecturer and professor in biostatistics at the University of Stockholm, where he earned his doctorate.

This expert has 45 years in public safety. He has spent the past 6 years on a college campus and has extensive experience in police policy and procedures in Maryland and Delaware. Additionally, he holds a JD from the University of Maryland.

This expert has over 30 years of experience as a police officer, mainly at the University of Maryland Police Department. His expertise lies in campus and student safety in all aspects of campus public safety, as well as law enforcement in Higher education and small city populations. He has handled bicycles cases where they being operated in restricted and populated areas on campus that required him to uphold the specific bike policy in place. Experienced in municipal and state task forces and alliances with cities dealing with town and gown issues.

This firearms and archery enthusiast and instructor has been involved in the field for over 41 years. He completed numerous training's with the U.S. Army, Armstrong State College and the Georgia Peace Officer Standards and Training Council. The expert has completed numerous firearms and archery-related courses and instructor courses over the years; currently, he teaches Firearms and Archery Safety for the Department of Environmental Conservation with the State of New York and for the Wildlife Resources Commission for the State of North Carolina. The expert is a Certified Instructor in Firearms Training and a Range Safety Officer through the National Rifle Association and the TAP3X Group of Companies, and he has published 30+ works on archery and firearm shooting. He now runs a firearm and archery training and consulting business.

This Tennessee based expert entered the waste management industry in 1988, joining the old Browning-Ferris Industries as a District Manager of Environmental, Safety and Health for the Nashville District, covering 22,500 square miles. He was responsible for hiring, training, risk management, claims and compliance with OSHA, DOT and EPA regulations. He later became the Director of Solid Waste for the city of Franklin, TN, where he oversaw the conception and completion of a Municipal Services Complex that included a new 500-ton per day transfer station and 20,000 square foot operations center. He has been a member of the Solid Waste Association of North America for almost twenty years, and is certified to teach in Collections, Transfer Station, Recycling, Integrated Solid Waste Management and Principals of Solid Waste Management. He has written or edited numerous textbooks for the organization.

This fire analysis expert received his PhD in engineering mechanics from Virginia Tech. He is a licensed fire protection engineer. He has been involved in research for over 17 years and is currently an associate professor in fire safety engineering technology at an elite university.

This expert is an experienced service supervisor with a history working in the auto service industry. He completed his training as a communications specialist at the Maryland Army National Guard and is currently a Service Manager at an auto and repair shop.

This qualified expert received his BA from Valparaiso University and is a licensed OSHA trainer for numerous courses. He has managed various construction safety projects including the installation and modification of industrial equipment valued at over a billion dollars. Formerly, he served as a night safety manager for Gallagher Kaiser at General Motors and as a safety manager for NKC American at Toyota Motor Manufacturing. He currently is the safety manager for a prominent aluminum manufacturer overseeing the installation of a new stamping bed.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This expert received a Ph.D. in Biomedical Physics and is board certified in Radiology. She is a certified Radiation Safety Officer and a member of the American College of Medical Physics and American Nuclear Society.

This expert has over 35 years of experience of experience, specializing in bicycle accident investigation. He is on the ASTM Committee for bicycle standards. Previously President of the National Academy of Forensic Engineers, he is a Fellow of both the American Society of Civil Engineers and the National Academy of Forensic Engineers. He is a Registered Professional Engineer for ten states and has authored several books and articles on subject of bicycle safety. He currently serves as President of a forensic engineering firm.

This expert has been working with fire extinguishing systems for 40 years. He is a Registered Professional Engineer and holds membership in both the Society of Fire Protection Engineers and the National Fire Protection Association. He spent 15 years working for Ansul/Wormald, starting as a Development Engineer of fire suppression products and working his way up through the roles of Manufacturing Engineer, Operations Management, Applications Engineer, Product Development Manager, and eventually to Vice President of Wormald Fire Systems. After serving in executive positions with Fenwal Safety Systems and Forney Corporation, he became President of Kidde Technologies, a position he held for over a decade. Currently, this expert is the Principal of his own fire systems consultancy, wherein he utilizes his technical and market experience in the fire suppression industry to aid businesses, manufacturers, and private equity firms on a variety of projects and initiatives related to fire protection systems.

This expert has over 10 years of professional experience in OSHA & MSHA advisory services, specifically as it relates to hazardous materials management, oil & gas rig safety, environmental engineering, and fire safety. He earned a Master of Occupational Safety & Health/Environmental Management from Columbia Southern University and a PhD in Safety Sciences from Indiana University of Pennsylvania. He is a Certified Safety Professional through Board of Certified Safety Professionals and teaches field safety protocols for the NCCER Core curriculum. This expert is currently a professor of safety management & environmental/fire protection engineering at a Texas based university and a principal consultant providing OSHA & MSHA advisory services.

This expert has extensive experience with managing day to day operations and safety protocols on large, complex projects for the past 20 years. He has extensive certifications in haz-mat operations and emergency response, specifically as it relates to OSHA compliance. He is a member of the AGC Safety Committee, the National Association of Safety Professionals, and the National Fire Prevention Association. His expert witness experience focuses on construction flaws and OSHA safety violations.

This highly-qualified expert has 20+ years of experience in the occupational safety industry both as an educator and consultant in the field. She has 20 years of experience in safety management, 16 years in safety consulting, and 20 years of teaching safety courses at top ranking accredited Universities. She has a Masters from Indiana University in Occupational Health and Safety and a B.S. in Safety Management from Indiana University. She is licensed in Accident, Health, and LIfe Insurance, and is a member of the American Society of Safety Engineers, the National Safety Council Defensive Driving International Executive Board and the Indiana State University Safety and Health Advisory Board. She is currently the Director of Academics and an Adjunct Professor teaching safety courses for a top ranked University, and is an OSHA/Safety Consultant with an industry-leading safety and training consulting firm.

This highly qualified expert has 30 years of experience in the design, construction, and operation for various racing circuits in the world. He holds a B.Sc. in Civil Engineering from the University of London and has been certified as an Instructor in Track Safety by the Sport Car Club of America. He has worked on various motorsports facilities including Formula One and motorcycle circuits. 'He currently works as Principal of a motorsports facility consulting firm.