Manufacturing Expert Witnesses

This expert is a building and construction professional with over 30 years of hands-on experience in the construction and building inspection industries. He has testified in numerous trials and depositions for both plaintiff and defense attorneys. He has been qualified as an expert in construction and personal injury cases in courtrooms from New York City to Connecticut to Boston and has authored and presented numerous Continuing Legal Education courses, coast to coast. This expert has been specifically trained in residential and commercial building codes, construction site safety, residential and commercial building envelopes, slip, trip and fall accidents and building inspections. His decades of practical experience provides him with the unique ability to translate written code words into three-dimensional, real world interpretations making him extremely valuable as a forensic expert. Since the late 1970’s, This expert has been involved in the residential and commercial construction and building inspection industries. He also has extensive experience in prefabricated buildings and ran separate building manufacturing, roofing and drywall companies as subsidiaries of his construction company. Using the partnership and knowledge of his father, combined with his natural instincts and abilities as a building professional, he has worked side by side with his dad in the family building inspection and construction businesses since the late 1970’s. As this expert says, “you cannot learn in college what you can learn from your father”. With that as his mantra, he is a firm believer that there is no better educational resource than hands-on experience. In 2014 this expert was hired as the lead expert by one of New York City’s most prominent personal injury law firms to act as the plaintiff’s safety expert in a construction accident case that returned a verdict in favor of the plaintiff in the amount of $62 million, the highest amount ever awarded to a single plaintiff in the history of Queens, New York.

This highly qualified engineer has over 15 years of consumer products engineering experience. He has held many prestigious positions at such companies as Electrolux and General Electric and currently owns and is a lead engineer of a highly successful electronics design firm.

This expert has been a practicing engineer for nearly 25 years. A registered Professional Engineer in good standing in 45 states (including Florida), he is a member of several professional engineering societies, as well as the International Sign Association and the Mid-South Sign Association. He has worked for a number of large engineering firms and industrial manufactures, and he currently serves as an Engineering Manager at an engineering firm that is a leader in the sign industry.

This expert has over 40 years of experience as a mechanical engineer. His research in tribology, machining of advanced materials, medical device design, dental materials, and high temperature coatings is widely recognized in the scientific and engineering communities. He has published over two hundred fifty papers and reports related to machining of ceramics, mechanisms and mechanics of interfaces, wear and friction, boundary lubrication, and biotribology; and has given more than three hundred lectures on these subjects. He has served as President and CEO for a heart pump developer, a subsidiary for a product company where he served as Vice President of Biotechnology.

This well seasoned former senior engineering associate at Exxon Chemical has almost 60 years of experience in manufacturing of olefin based polymers. During his time at Exxon he was the technical start up leader for a multi-million dollar polypropylene project. In 1994 he founded his own polymers and process engineering consulting company where he has worked with several Fortune 500 companies on process development and scale up, process design, plant problem solving and training. He has authored two books on process engineering as well as developing a five day training course to cover problem solving concepts.

This expert is one of the top innovators in the U.S. specializing in cranial protective system technology, materials technology, design, and manufacturing. He has invented, designed, engineered, and manufactured multiple products being used today in sporting goods, and has been a consultant and contractor for prime military contractors and private firms.

This fully credentialed actuary has a special focus on warranties, extended warranties, and service contracts. He regularly speaks at conferences such as the Warranty Chain Management and Warranty Innovations conferences, as well as being an Advisory Board member of the Global Warranty & Service Contract Association (GWSCA). He has authored 4 publications relating to warranties and actuarial assessments of warranties and is currently a consulting actuary at a top actuarial service provider.

This expert is a former public-company executive who now consults as a forensic engineer for patents, accidents, and commercial matters. His 40 year career spans industrial, oilfield, and medical interests, both domestic and international. His expertise includes electrical and electronic engineering, industrial computers, and automated control systems. He has qualified several times as an expert witness in US Federal Court, most notably in the Deepwater Horizon / BP oil spill trial.He is specially trained in control systems in a number of industrial aspects, including NFPA 85/ ISA 77 Boiler Control Engineering. He is a licensed electrical engineer, licensed control systems engineer, and a licensed master electrician.

This highly qualified hazardous materials transportation expert earned his BS in Industrial Engineering, his MS in Engineering Management, and his PhD from Kennedy Western University. This expert has been involved in the development and implementation of hazardous materials safety regulations for more than 30 years and has been responsible for a broad range of domestic and international hazardous materials safety efforts. He has served as the chairman of the UN Sub-Committee of Experts on the Transport of Dangerous Goods, and as the chairman and vice chairman of the ICAO Dangerous Goods Panel. This expert spent 18 years in the Department of Transportation/Pipeline and Hazardous Materials Safety Administration's Office of Hazardous Materials Safety, and currently serves as the VP of Government Affairs/Consultant for a private hazardous materials shipping solutions firm.

This expert is a partner in a large independent public accounting firm, where he serves as the leader of the firm's National Retail/Consumer Products industry group. He provides consulting services in the apparel, manufacturing, distribution, and retail industries.

This expert has more than 20 years of experience in the field of compensation, and is recognized worldwide for his global expertise in sales incentive plan design, as well as other kinds of variable reward and recognition programs. He has worked in both public and private sectors, and has a wide range of diversified industry experience that includes Finance, Managed Care, Food, Chemical and Durable Goods manufacturing. He has been an invited speaker at several professional conferences that include the New Jersey Compensation Association and HR.com, where he discussed and presented "best practice" with respect to the sales incentive design process. A longstanding member of the American Compensation Association, he has earned the professional designations of Certified Compensation Professional, and Global Remuneration Professional. He was recently published in World at Work Journal and he is also a member of the New Jersey Compensation Association. He currently serves as Director of Compensation for the country's largest rail and bus commuting system.

This highly qualified expert has extensive background in construction management, design architecture, and forensic consulting. He earned his B.S. in Architectural Technology from the New York Institute of Technology; he is a New York State Registered Architect, a Board Certified Construction Manager and CCM Subject Area Expert with the Construction Management Association of America (CMCI). The expert works as the Managing Architect for a New York City school construction organization. He has served has a Construction Manager for projects involving Touro College facilities, Fulton Street Transit Center, the World Trade Center, Crain's Publishing Headquarters, and Watson Wyatt Worldwide among many others. He presently has a forensic consulting practice where he specializes in claims mitigation, analysis, productivity analysis, earned value analysis, contract dispute resolution, delay claim impact analysis, coupled with in-depth knowledge of cost control practices during all phases of project delivery. He is also now a PT Adjunct Professor in Construction Management and Real Estate at a large New York College.

This qualified expert has worked for over 30 years at a family-owned brush manufacturing company that has been in his family for four generations since 1875. He received a B.S. in Business and Fine Art from the University of Northern Colorado. He has worked with NASA as a subcontractor to produce brushes for the Mars Rover and has developed brushes for the automotive detailing industry. He currently serves as President and CEO of a brush manufacturing company that consists of three divisions including an industrial and technical brush division, a cosmetic and spa brush division, and a producer of specialized architectural wall and ceiling materials. His company has been recognized by the New York Times as a successful company competing against foreign imported products.

This expert earned a BS in Electrical Engineering Technology from Purdue University and an MBA from Butler University. He specializes in industrial products, technical sales, industrial automation, pneumatics, embedded controls, firmware, embedded systems design, real time operating systems, and industrial networks. He has worked as an electrical/design engineer throughout his career, and is currently the Founder and Technical Lead of an industrial control manufacturer.

This highly qualified expert has 20+ years of safety administration and leadership experience. He earned his BS in Organizational Leadership from Wright State University and his MS in Occupational Safety and Health from Columbia Southern University. He is OSHA certified as an Occupational Safety & Health Manager and Health Professional and he belongs to the American Society of Safety Engineers. His expertise includes rollout safety policies and procedures, prevent or correct unsafe working conditions, design work areas & policy procedures, address hazard and compliance issues, and develop and benchmark safety standards program. He formerly served as Safety Leader in the gardening department at Home depot.

This expert has experience with toxic environmental contamination, industrial chemical exposures and occupational health. this expert is a physician (The Ohio State University), board certified in Occupational Medicine (American Board of Preventive Medicine), who holds a Doctor of Philosophy degree in Toxicology (University of Cincinnati, Kettering Laboratory). He has served on the faculty of the University of Cincinnati and the New York University Medical Center and joined the faculty of the University of Texas School of Public Health in 1992 in its Environmental Sciences Discipline and Occupational and Environmental Health and Aerospace Medicine Module. He is Associate Professor of Occupational Health, directs the Occupational and Environmental Medicine Residency Program and is a member of the research team for an education and research center. He is a graduate of the Health Educators Fellowship and serves as a member of the Center for Interprofessional Collaboration, Steering Committee. He maintains a clinical practice of occupational medicine and medical toxicology and is a frequent consultant to governments, corporations and the legal community on matters related to industrial chemical exposure, toxicology and environmental justice. His research interests include: environmental and occupational chemical exposures, inhalation injuries, the relationship between metal exposures and cancer, and professional training and learning. As a teacher, he specializes in reducing complex subjects to familiar and recognizable concepts that are accessible to a broadly diverse audience.

This expert researches how people access and respond to safety and health risk information, examining the effectiveness of consumer product and industrial equipment warnings. He earned his Bachelor's degree in Mass Communication from Kansas State University and both his Master's and doctoral degrees in Communication Studies from the University of Kansas. He has published his scholarly findings on the effectiveness of product warning labels and the communication of risk. He currently serves as a full professor of Communication at a prominent Texas university.

This expert is a hands-on� shop floor experienced Metallurgist, Quality Engineer/Manager, and QA/QC Inspector with expertise in aluminum, steel, titanium, and specialty metals mill operations, castings, forgings, extrusions, stampings, metal injection molded (MIM) parts, API Spec 5L Steel Line Pipe, Casing, Drill Pipe, and OCTG. Consulting engineer, Technical Advisor, Senior Supplier Quality Engineer (SQE), and Vendor Surveillance Source Inspector for major clients in various industries such a transportation and technology.

This expert is a multi-disciplined inventor with dozens of patents and applications, and a seasoned business creator with 23 years of experience in various areas of Automotive Electronics, Consumer Electronics, and Electronic Product Design. In 1991, he established a design, manufacturing and distribution facility for his dozens of inventions. He is currently a consultant working primarily in the litigation context of electronics.

This PVC industry veteran was with the Uni-Bell PVC Pipe Association, North America's PVC pipe manufacturers association, from 1978 until 2008. He is also currently the Chair a sustainablility committee in the American Water Works Association, where he has been a Member since 1979. The expert is a Member of ASTM International, the North American Society For Trenchless Technology, and the Pipelines unit of the American Society of Civil Engineers. He now works as a Vice President for a water, sewer and conduit PVC pipe supplier. He is licensed as a Professional Engineer in Ohio and Texas.