Manufacturing Engineer Expert Witnesses in Iowa

This expert has over 35 years of forensic engineering experience, and he has investigated and worked up more than 100 cases in each area of slip/trip/miss and fall, accident reconstruction and crash analyses, and product failure. He has published papers in the Journal of the National Academy of Forensic Engineers (NAFE). He has long been active in professional societies and is a past chairman of several. He has been listed in Who's Who in Engineering and Science. He has given expert witness testimony in Federal Courts, State Courts, Local Courts, Arbitration Hearings, and in depositions.

This highly qualified hazardous materials transportation expert earned his BS in Industrial Engineering, his MS in Engineering Management, and his PhD from Kennedy Western University. This expert has been involved in the development and implementation of hazardous materials safety regulations for more than 30 years and has been responsible for a broad range of domestic and international hazardous materials safety efforts. He has served as the chairman of the UN Sub-Committee of Experts on the Transport of Dangerous Goods, and as the chairman and vice chairman of the ICAO Dangerous Goods Panel. This expert spent 18 years in the Department of Transportation/Pipeline and Hazardous Materials Safety Administration's Office of Hazardous Materials Safety, and currently serves as the VP of Government Affairs/Consultant for a private hazardous materials shipping solutions firm.

This highly qualified engineer has 25+ years of industry experience. He is a member of several professional societies including the American Association of Snowboard Instructors, American Society of Mechanical Engineers, American Academy of Forensic Sciences, American Water Ski Association, and American National Standards Institute. This expert teaching experience and serves as a reviewer for several peer reviewed publications including the American Society for Testing and Materials and American Society of Mechanical Engineers. Currently, this expert is the President of an engineering consultancy. He earned his BSME and MSME at Worcestor Polytechnic Institute.

This highly qualified expert earned his B.S. and M.S. in Mechanical Engineering and a Ph.D. in Biomedical Engineering from Marquette University. From 1977 until 2010, he held increasingly senior roles within Baxter Healthcare Corporation, most recently serving as the Technical Director of Applied Science & Technology. He was an Adjunct Professor at Northwestern University and spent four years at Exponent before becoming an independent consultant. The expert is a registered Professional Engineer in Illinois and has received 17 U.S. patents.

This engineering expert has over 30 years of experience in the field. He earned his Bachelor of Engineering and his Master of Engineering Science in Ireland before coming to the United States while working for Bendix Commercial Vehicle Systems, where he designed electronic hardware and system software for air braked truck / trailer ABS and traction control systems. He then worked on ABS and traction control for passenger cars and subsequently started the Electronics Division at Wabash National which he led from 1998 to 2003. From 2004 until 2007, the expert worked for Dana Commercial Vehicle Systems, where he spent a year leading the development of automatic tire inflation products for commercial and military applications. Before starting his own consultancy he led the development of Traction Control, ABS and related technology for Caterpillar Inc. from 2007 to 2015. This included positioning Caterpillar as the industry leader in differential clutch based drive torque distribution and traction control for off highway vehicles. He has been granted 23 patents and is a Member of the Society of Automotive Engineers and the Institute of Electrical and Electronics Engineers.

This expert runs a full-service, comprehensive safety and engineering facility. As a leader in the field of mechanical engineering and safety, his goal is to increase awareness of personal safety issues, while maintaining exacting standards and best practices of the science of personal safety and industrial safety. He is a member of numerous prestigious societies in the field, including the Society for the Advancement of Material and Process Engineering and the Society of Automotive Engineers. Currently, this expert is the principal of a design engineering and safety analysis firm.

This international technology expert has hands-on experience in all aspects of agriculture, including crop production, equipment design, R&D, teaching, manufacturing, and marketing. He has four advanced degrees in business/engineering, including a Ph.D. in the Automation of Technological Processes from the National University of Life and Environmental Science of Ukraine. He has authored 70+ publications and holds 11 U.S. patents, as well as others from Canada, the EU, and Russia. The expert currently works in a product development and marketing capacity for an agricultural systems consultancy.

This highly qualified expert has over 25 years of experience in the chemical and petrochemical industries. He earned his B.S., M.S., and Ph.D. in Chemical Engineering from Brigham Young University. The expert has worked in academic roles throughout his career, including adjunct professor roles at the University of Michigan and the University of Utah. He has also been very active in industrial positions and held research roles with Dow Chemical Company and John Zink Company, among others. The expert has published 45+ papers, has authored 5+ book chapters, and holds 8 patents. He is an active industry consultant and currently serves as a Professor of Chemical & Nuclear Engineering for a university in Missouri.

This Forensic Engineering Expert obtained his BS in Mechanical Engineering from Marquette University and his BS in Electrical Engineering from the University of Wisconsin-Milwaukee. He is certified as a Professional Engineer, Fireplace Inspector, Hazwoper, and as a Quality Engineer. He is a member of the National Academy of Forensic Engineers, the American Society of Mechanical Engineers, the Institute of Electrical and Electronic Engineers and the National Society of Professional Engineers. He has 25+ Publications and is currently the President and a Professional Engineer at an engineering firm in WI.

This qualified expert of Mechanical Engineering and Industrial Machinery obtained his BS in Mechanical Engineering from Iowa State University and his MA in Management from Regent University. He is a registered Professional Engineer and is certified in SolidWorks, Motion Control and CNC Product Lines, Fire Investigation, Reliability & Maintainability and has 9 Patents. He is currently the President of a Product Manufacturing Firm and the President of an Engineering Consulting.